Australien
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
Keine Daten verfügbar
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
Desmodur CQ L 75 (C) is an aromatic polyisocyanate based on toluene diisocyanate (TDI) using renewable feedstock attributed via mass-balance (ISCC PLUS certified).
It can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate two-component polyurethane coatings and adhesives.
It can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate two-component polyurethane coatings and adhesives.
Lagerungsbedingungen
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Probenahme
Keine Daten verfügbar
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Flash point | DIN 51755 | °C | approx. 5 |
Density at 20 °C | DIN EN ISO 2811-3 | g/ml | approx. 1.17 |
Renewable content | Attributed via mass-balance according to ISCC PLUS | % | approx. 30 |
Equivalent weight | approx. 315 |
Genannte Eigenschaften Spezifikation
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Color (Iodine) | M017-EN 1557 | ≤ 2 | |
NCO content | M105-ISO 11909 | % | 13.3 ± 0.4 |
Viscosity (23 °C) | M014-ISO 3219/A.3 | mPa*s | 1,600 ± 400 |
Non-volatile content | M020-ISO 3251 | % | 75.0 ± 2.0 |
Monomer content | M106-ISO 10283 | % | < 0.5 |
Downloads
-
Technisches Datenblatt
-
ENDownload
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
-
DEDownload