- Lacke, Farben & Druckfarben
Baymedix® FP505 (Provisional technical data sheet)
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
Keine Daten verfügbar
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
Baymedix® FP505 is an aliphatic, hydrophilic prepolymer based on hexamethylene diisocyanate (HDI). Baymedix® FP505 can be used for the preparation of aliphatic polyurethane foams.
Lagerungsbedingungen
- Storage in original sealed Covestro container.
- Recommended storage temperature: 15 - 30 °C.
- Protect from moisture, heat and foreign material.
General information : The product is highly sensitive to moisture and reacts with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. Water in any form (moist air, water-containing solvents, wet containers) must be prevented from gaining access. A dangerous build-up of pressure can occur through the generation of carbon dioxide. Storage at higher temperatures will result in increase of color and viscosity.
- Recommended storage temperature: 15 - 30 °C.
- Protect from moisture, heat and foreign material.
General information : The product is highly sensitive to moisture and reacts with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. Water in any form (moist air, water-containing solvents, wet containers) must be prevented from gaining access. A dangerous build-up of pressure can occur through the generation of carbon dioxide. Storage at higher temperatures will result in increase of color and viscosity.
Probenahme
Keine Daten verfügbar
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Solids content | % | approx. 100 | |
Flash point at 1013 hPa | DIN EN ISO 2719 | °C | > 250 |
Density at 20 °C | DIN 51757 | g/cm^3 | approx. 1.1 |
Genannte Eigenschaften Spezifikation
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | approx. 3,600 |
NCO content | M105-ISO 11909 | % | 4.95 - 5.65 |
Monomer content (HDI) | M106-ISO 10283 | % | ≤ 0.29 |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com