Applications
Technical grade93/7 typeHAASuitable for industrial and architecturalTGIC
Form supplied
Flakes
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Acid value | 48 - 55 | mg KOH/g | TM-2400 | |
| Color | 8 | b* | TM-2019 | |
| Viscosity | 72 - 122 | Pa·s | TM-2727 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Glass transition temp. (Tg) | 68 | ºC | TM-2076 | |
| Specific gravity | 1,2 | g/cm3 | ASTM D5965 |
Storage
The resin should be stored indoors in the original, unopened and undamaged containers in a dry place at storage temperatures 5-35 °C.
Storage time
Covestro represents that, for a period of 12 months (360 days) following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in section "specifications or characteristic data" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under section "storage" above and is otherwise handled appropriately. The lapse of the 12 months (360 days) period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the 12 months (360 days) period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 12 months (360 days) period.
Processing
Glossy, white powder coating Extrusion process parametersSetting temperatures: 60ºC/120ºC/115ºCSpeed: 400 rpmTSA FSCM 15-25 twin screw extruderApplication process conditionsCoating thickness ≈50 µmCorona spray gun, voltage 60 kVCure Cycle 15' 160°CCure Cycle 10' 180°CCure Cycle 6' 200°CStoving in an air-circulated oven
