Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Product description
Softcel VE-1100 polyether polyol is a unique polyol for the production of slabstock and molded viscoelastic foam.
Applications
Softcel VE-1100 polyether polyol is a unique polyol for the production of slabstock and molded viscoelastic foam. It provides expanded formulating and processing flexibility and is designed to offer enhanced reactivity and promote cure of high density viscoelastic foams. This allows for the production of a wide range of viscoelastic foam grades with consistent performance properties that can be tailored to end-use applications.Softcel VE-1100 is typically employed as the primary polyether polyol in TDI based formulations of most standard density and firmness grades of slabstock foams. Firm grades may require an addition of a high solids polymer such as Arcol® HS-200 polymer. Low level addition of a high hydroxyl foam modifier/extender is generally recommended to control foam recover rates. Most other standard chemical intermediates may be employed. Use of a lower functionality MDI such as Mondur® 3694 may be beneficial for processing very high density slabstock grades and is recommended for production of molded viscoelastic foam. As with any product, use of Softcel VE-1100 polyol in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Specific gravity | at 20°C | 1,029 | ||
| Viscosity | at 25°C | 240 | cSt | |
| Flash point | PMCC | 212 | °C | |
| Bulk density | at 20°C | 8,59 | lb/gal |
Storage
Softcel VE-1100 polyol is slightly hygroscopic and may absorb water. Containers should be kept tightly closed and protected from contamination with moisture and foreign materials, which can adversely affect product quality. This polyol can become quite viscous at low temperatures. For ease of handling, storage temperatures between 15°C (59°F) and 60°C (140°F) are recommended. The shelf life is twelve months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
Health and Safety Information
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, food contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
