Covestro represents that, for a period of 6 months (180 days) following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values set forth in chapter "Specification" above, what ever is applicable, provided that the product is stored in full compliance with the storage conditions set forth in and referenced under chapter "storage" above and is otherwise handled appropriately. The lapse of the 6 months (180 days) period does not necessarily mean that the product no longer meets specifications or the set values. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications or the set values. Covestro does not make any representation regarding the product after the lapse of the 6 months (180 days) period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 6 months (180 days) period.
Applications
Suitable for clear formulations providing excellent durability, chemical resistance, wood wetting, scratch and abrasion resistance and has very good sandability in base coat formulations. NeoRez® R-9029 is NMP and plasticiser free.
Form supplied
Form supplied is approximately 32 % in water and TGME (3.2%) DPNB (3.2%) DGME (1.1%).
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Non-volatile content | 1g, 1hr, 130°C | 31.0 - 33.0 | % | GAP0001 |
| Dynamic viscosity | LV, 1/60, 25°C | ≤ 250 | mPa·s | GAP0020 |
| pH-value | 7.2 - 8.5 | GAP0016 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Density | 1.03 | g/cm³ |
Solubility / thinnability
NeoRez® R-9029 can be thinned with water.
Storage
The resin should be stored indoors in original, unopened and undamaged container in a dry place at storage temperature between 5- 40 °C. Exposure to direct sunlight should be avoided. Packaging in HDPE heavy walled plastic is recommended. Avoid contact with Iron. Product will turn red in the presence of iron. Packaging in lined metal cans is not sufficient, use HDPE plastic only.
