Submit

Makrolon® FR6005 RE

MVR (300 °C/1.2 kg) 9.0 cm³/10 min; medium viscosity; easy release; flame retardant; impact modified; good surface quality; electrical/electronic; housing parts

联系专家
i
市场转换
选择会影响你得到的结果。
复制到剪贴板

关于

材料类型

无可用数据

材料

无可用数据

一般特征

无可用数据

储存条件

无可用数据

样品

无可用数据

包装类型

无可用数据

技术属性和数据表

属性名称 测试标准 测试标准 单位 数值
Barrel Temperatures - Front - °C 280 - 290
Barrel Temperatures - Middle - °C 270 - 280
Barrel Temperatures - Nozzle - °C 290 - 300
Barrel Temperatures - Rear - °C 250 - 260
Dry Air Drying Temperature - °C 120
Dry Air Drying Time - h 2 - 3
Hold Pressure (% of injection pressure) - % 50 - 75
Melt temperatures - °C 280 - 320
Moisture Content max. (%) - % <= 0,02
Mold Temperatures - °C 80 - 120
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt temperature - °C 300
Vent Depth - mm 0.025 - 0.075
属性名称 测试标准 测试标准 单位 数值
Burning behavior UL 94 UL 94 1.2 mm (BK) Class V-0
Burning behavior UL 94 [UL recognition] UL 94 1.5 mm Class V-0
Burning behavior UL 94 [UL recognition] UL 94 1.0 mm (BK) Class V-0
Burning behavior UL 94 [UL recognition] UL 94 3.0 mm Class V-0
Burning behavior UL 94 [UL recognition] UL 94 1.2 mm Class V-1
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.7
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.7
Glow wire test (GWFI) IEC 60695-2-12 1.0 mm °C 850
Glow wire test (GWFI) IEC 60695-2-12 1.5 mm °C 960
Glow wire test (GWFI) IEC 60695-2-12 3.0 mm °C 960
Glow wire test (GWIT) IEC 60695-2-13 1.0 mm °C 875
Glow wire test (GWIT) IEC 60695-2-13 1.5 mm °C 850
Glow wire test (GWIT) IEC 60695-2-13 3.0 mm °C 900
Relative temperature index (Electric strength) UL 746B 0.75 mm °C 115
Relative temperature index (Tensile impact strength) UL 746B 0.75 mm °C 105
Relative temperature index (Tensile strength) UL 746B 0.75 mm °C 115
Resistance to heat (ball pressure test) IEC 60695-10-2 °C 134
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 136
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 121
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 144
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 142
属性名称 测试标准 测试标准 单位 数值
Charpy notched impact strength ISO 21305/based on ISO 179/1eA 23 °C kJ/m² 68P
Charpy notched impact strength ISO 21305/based on ISO 179/1eA -10 °C kJ/m² 50C
Charpy notched impact strength ISO 21305/based on ISO 179/1eA -30 °C kJ/m² 20C
Flexural modulus ISO 178 2 mm/min MPa 2400
Flexural strength ISO 178 2 mm/min MPa 90
Izod notched impact strength ISO 21305/based on ISO 180/A 23 °C/ 3 mm kJ/m² 60P
Izod notched impact strength ISO 21305/based on ISO 180/A -30 °C/ 3 mm kJ/m² 15C
Nominal strain at break ISO 527-1,-2 50 mm/min % > 50
Puncture energy ISO 6603-2 -30 °C J 55
Puncture energy ISO 6603-2 23 °C J 54
Puncture impact properties - maximum force ISO 6603-2 -30 °C N 6100
Puncture impact properties - maximum force ISO 6603-2 23 °C N 5100
Strain at break b.o. ISO 527-1,-2 50 mm/min % 135
Stress at break ISO 527-1,-2 50 mm/min MPa 66
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2300
Yield strain ISO 527-1,-2 50 mm/min % 6
Yield stress ISO 527-1,-2 50 mm/min MPa 62
属性名称 测试标准 测试标准 单位 数值
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 9
Molding shrinkage, parallel/normal b.o. ISO 2577 Value range based on general practical experience % 0.6 - 0.8
属性名称 测试标准 测试标准 单位 数值
Comparative tracking index CTI IEC 60112 Solution A Rating 200
Surface resistivity IEC 60093 Ohm 4E17
Volume resistivity IEC 60093 Ohm*m 9E16
属性名称 测试标准 测试标准 单位 数值
Injection molding - Injection velocity ISO 294 mm/s 200
Injection molding - Melt temperature ISO 294 °C 300
Injection molding - Mold temperature ISO 294 °C 80
属性名称 测试标准 测试标准 单位 数值
Density ISO 1183-1 kg/m³ 1200

下载

技术数据表
Download
安全数据表
无可用直接下载,请访问 www.productsafetyfirst.covestro.com

你想知道更多关于 Makrolon® FR6005 RE?
与我们的专家取得联系!

Contact form image Zoe

我们如何联系您?

您希望了解哪种材料?

您希望进行哪种类型的查询?

如何联系您?

* 必填字段

Compare