i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 多元醇
材料
- 泡沫
- 块状
一般特征
Desmophen® 1366 is a reactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 25% by weight. It is designed for the production of high resilience flexible slabstock foams and cold-curing molded foam. It exhibits a broad processing range and allows the use of most commercially available silicone surfactants and amine catalysts.
储存条件
Recommended storage temperature (°C) 10 - 35
Product must be stored in sealed, moisture-tight containers. Partially used containers should be tightly resealed, due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
Product must be stored in sealed, moisture-tight containers. Partially used containers should be tightly resealed, due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
样品
Moisture access should be prevented when taking product samples.
包装类型
无可用数据
技术属性和数据表
命名属性特征
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Appearance | PET-03-04 | opaque white liquid | |
TDI basic value | pbw Desmodur® T on 100 pbw Desmophen® 1366 | 3.7 | |
Density 25 °C | DIN 51757 | g/cm³ | 1.04 |
命名属性规范
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Viscosity 25 °C | PET-10-01 | mPa*s | 2200 - 3000 |
Hydroxyl number | PET-11-01 | mg KOH/g | 20 - 25 |
Water content | PET-19-01 | % by wt. | ≤ 0.10 |
Hydroxyl number | PET-11-01 | mg KOH/g | 20 - 25 |
Water content | PET-19-01 | % by wt. | ≤ 0.10 |
Viscosity 25 °C | PET-10-01 | mPa*s | 2200 - 3000 |
下载
-
技术数据表
-
安全数据表无可用直接下载,请访问 www.productsafetyfirst.covestro.com