Before working with this product, you must read and become familiar with the available information on its risks, proper use, and handling. Information is available in several forms, e.g., in particular in the currently valid safety data sheets and product labels. For further information contact your Covestro representative.
Product description
Applications
Desmodur® VP.PU 10WB21 is a NCO terminated diphenyl methane-4,4'-diisocyanate (MDI) prepolymer for the production of rebonded flexible foams.
Sampling
The access of moisture in any form must be prevented.
Specification
Property | Test Condition | Value | Unit | Standard |
---|---|---|---|---|
Appearance | brownish liquid | DIN ISO 6271 | ||
NCO content | 25°c | 19,5 to 20,5 | % | MDI-01-01 |
Density at 20 °C | approx. 1,163 | g/cm3 | DIN 51757 | |
Viscosity at 25 °C | 900 to 1300 | mPa*s | MDI-01-02 | |
Acidity | 250 to 400 | ppm | MDI-01-03 |
Storage
Recommended storage temperature (°C): 20 – 40Shelf life (ex works) 6 months if stored in sealed, moisture-tight containersPartially used containers should be tightly resealed due to the hygroscopic nature of the product.Recommended temperature for processing (°C): 20 - 40.
Processing
Desmodur® VP.PU 10WB21 reacts with moisture causing polyurea layers within the mixing tools, which have to be removed mechanically from time to time.The viscosity of the Desmodur® TP.PU 10WB21 might increase depending on storage time and temperature. This viscosity increase does not limit the processability of the product according to our experience.Desmodur® TP.PU 10WB21 can partly crystallize at a temperature below 15 °C. The product can be warmed up for a short period of time to a temperature of approx. 50 °C in order liquefy it again.
Health and Safety Information
Disclaimer
General
The manner in which you use our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products to determine suitability for your processing and intended uses. Your analysis must at least include testing to determine suitability from a technical, health, safety, and environmental and regulatory standpoint. Such testing has not necessarily been done by Covestro, and Covestro has not obtained any approvals or licenses for a particular use or application of the product.
Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request.
All information and including technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed by you that you assume and hereby expressly release indemnify us and hold us harmless from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent.
Non Medical and non Food Contact
This product is not designated for the manufacture of a medical device or of intermediate products for medical devices (1). This product is also not designated for other specifically regulated applications (e.g. including cosmetics, plant protection, fertilisers, plant strengtheners, food processing, food contact and others). If the intended use of the product is for the manufacture of a medical device or of intermediate products for medical devices or for other specifically regulated applications Covestro must be contacted in advance to provide its agreement to sell such product for such purpose. Nonetheless, any determination as to whether a product is appropriate for use in a medical device or intermediate products for medical devices, for Food Contact products or cosmetic applications must be made solely by the purchaser of the product without relying upon any representations by Covestro.
1) Please see the Guidance on Use of Covestro Products in a Medical Application document.
Sample
Any samples provided by Covestro are for testing purposes only and not for commercial use.
Typical value
These values are typical values only. Unless explicitly agreed in written form, they do not constitute a binding material specification or warranted values
Contact
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .