Before working with this product, you must read and become familiar with the available information regarding its risks, proper use, and safe handling. This information is provided in various formats, including the current Safety Data Sheet (SDS) and product label. SDS can be accessed via the following link:
Safety Data Sheets (SDS) for Covestro products | Covestro
For further questions, please use the contact information provided on this technical data sheet.
Product description
Form supplied
Drums, IBCs, road tankers or tank containers.
Sampling
Moisture access must be prevented when taking product samples.
Specification
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| 2,2'-MDI | ≤ 0,80 | % by wt. | MDI-01-06 | |
| 2,4'-MDI | 50,00 - 60,00 | % by wt. | MDI-01-06 | |
| 4,4'-MDI | ≥ 39,20 | % by wt. | MDI-01-06 | |
| Hydrolysable chlorine | ≤ 50 | mg/kg | MDI-01-04 |
Typical Values
| Property | Test Condition | Value | Unit | Standard |
|---|---|---|---|---|
| Purity | (mol.wt. 250) | ≥ 99,5 | % by wt. | 2011-0248603-94 |
| NCO content (theoretical) | 33,6 | % by wt. | ||
| Phenyl isocyanate content | ≤ 10 | ppm | AM 2014 | |
| Viscosity at 25° C | 12 ± 2 | mPa·s | AM 2016 | |
| Density at 40 °C | 1,21 | g/cm3 | DIN 51757 | |
| Solidification range | 12 - 20 | ° C |
* These values provide general information and are not part of the product specification
Storage
Recommended storage temperature: +20 to +30 °CShelf life (ex works): 6 months if stored in moisture-tight drumsLike all isocyanates, Desmodur VP PU 0129 M is sensitive to moisture and reacts with water to form insoluble urea derivatives and carbon dioxide. The generation of carbon dioxide in sealed containers can lead to a dangerous build-up of pressure. Storage at temperature above 30 °C speeds up the formation of dimers (uretidinedione) which are reducing the shelf life of the product. Storing Desmodur VP. PU 0129 M in a crystallised or partially crystallised state also leads to the relatively rapid formation of dimers and should therefore be avoided. Provided dimerisation is not too far advanced, the crystallised product can still be brought back to a usable state by melting it rapidly but gently at a temperature in the range of 60 to 70 °C. The product should never be heated to a temperature in excess of 70 °C. Once it is melted, the product must be homogenised and cooled down to the recommended storage temperature. Since this treatment creates a higher content of dimers, it is then advisable to use the product as soon as possible. The access of air, particularly if combined with exposure to light over a longer period of time, can result in yellowish to yellow discoloration of the product.
Health and Safety Information
Disclaimer
Responsibility and Liability
The use of Covestro products, technical assistance, and information (regardless of how provided) is outside Covestro’s control and is solely the responsibility of the customer. The customer must conduct adequate testing to determine the suitability of products for its intended use, including but not limited to technical, health, safety, and environmental aspects. Unless otherwise agreed in writing, all products are sold exclusively under Covestro’s standard conditions of sale, which prevail in case of conflict and are available upon request.
The terms and conditions of sale and delivery are available via the following link:
https://order.covestro.com/covestrostorefront/saleConditions
All information is provided “as is” without warranties, express or implied, including merchantability or fitness for a particular purpose, and is subject to change without notice. To the maximum extent permitted by law, Covestro disclaims, and the customer assumes all liability for losses, damages, or claims arising out of use of Covestro products, technical assistance, or information. Any statement or recommendation not expressly contained in Covestro documentation is unauthorized and shall not bind Covestro. Nothing herein shall be construed as encouraging or recommending the use of any product in conflict with any claim of any patent. No license is implied or in fact granted under the claims of any patent.
Restrictions on Regulated Applications
This product is not intended for use in regulated applications such as agriculture, cosmetics, drinking water contact, medical products (e.g., medical devices), toys, or similar uses subject to specific regulatory requirements. Prior written approval from Covestro is required before this product may be used in any regulated application. The customer is solely responsible for ensuring compliance with all applicable laws and determining product suitability. Covestro disclaims all liability and warranties for unauthorized regulated uses.
Typical Value
The values provided are typical only and do not represent binding specifications. Unless expressly confirmed in a written contract, these values are not part of the contractual quality agreement and must not be relied upon as a warranty or guarantee of product performance.
Sample
Samples provided by Covestro are intended solely for evaluation and testing purposes by the customer and may not be used in commercial applications, resold, transferred to third parties (except qualified testing service providers acting on behalf of the customer), reverse engineered, modified, or used in any manner not explicitly authorized in writing by Covestro. Samples are provided ‘as-is’ without any warranties, express or implied, including fitness for a particular purpose. Customers are solely responsible for ensuring safe handling, regulatory compliance, and suitability of the material for their intended evaluations. Covestro disclaims all liability for damages or losses arising from the use of samples.
Contact Information
Please use our contact form or contact us directly by sending an e-mail to technical-datasheets@cx.covestro.com .
