i
市场转换
选择会影响你得到的结果。
关于
材料类型
无可用数据
材料
无可用数据
一般特征
Desmodur® PC-N is a modified diphenyl-methane-4,4'-diisocyanate (MDI).
Desmodur® PC-N is a modified diisocyanate that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives.
Desmodur® PC-N is a modified diisocyanate that is liquid at room temperature and is suitable for combination with Baycoll® in the formulation of adhesives.
储存条件
- Storage in original sealed Covestro container.
- Recommended storage temperature: 20 - 25 °C.
- Protect from moisture , heat and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Prolonged storage at temperatures above 25 °C results in a deterioration in quality as the product becomes increasingly turbid owing to the formation of a sediment (dimers) that is not readily soluble. For example, storage stability at 40 °C is limited to a maximum of 4 months. Storage at too low temperature results in crystallisation which starts at around 15 °C. The storage of the crystallised product must be avoided as this promotes the formation of non-meltable dimers. As a result, the product can no longer be fully melted after around 3 weeks.
To prevent crystallization, it must be ensured that the product does not cool to below 15 °C. Upon receipt, samples of the product should be tested for crystallisation. If crystallisation has occurred during transportation or storage, the product must be remelted immediately. On no account should the temperature during melting (material temperature) exceed 70 °C nor should the time needed to reliquefy the product be exceeded as this will greatly promote the formation of non-meltable dimers.
It should be ensured that the entire content of the container is remelted and homogenised. The container must then be closed immediately and its content cooled to and kept at the standard storage temperature (20 - 25 °C). If the product is in a partially crystallised state for a brief period, there will be no significant effect on the product quality. Only the storage stability may be reduced slightly, i.e. remelted product should be used as soon as possible.
- Recommended storage temperature: 20 - 25 °C.
-
General information: The product is sensitive to moisture and should therefore be stored in its sealed original containers. Prolonged storage at temperatures above 25 °C results in a deterioration in quality as the product becomes increasingly turbid owing to the formation of a sediment (dimers) that is not readily soluble. For example, storage stability at 40 °C is limited to a maximum of 4 months. Storage at too low temperature results in crystallisation which starts at around 15 °C. The storage of the crystallised product must be avoided as this promotes the formation of non-meltable dimers. As a result, the product can no longer be fully melted after around 3 weeks.
To prevent crystallization, it must be ensured that the product does not cool to below 15 °C. Upon receipt, samples of the product should be tested for crystallisation. If crystallisation has occurred during transportation or storage, the product must be remelted immediately. On no account should the temperature during melting (material temperature) exceed 70 °C nor should the time needed to reliquefy the product be exceeded as this will greatly promote the formation of non-meltable dimers.
It should be ensured that the entire content of the container is remelted and homogenised. The container must then be closed immediately and its content cooled to and kept at the standard storage temperature (20 - 25 °C). If the product is in a partially crystallised state for a brief period, there will be no significant effect on the product quality. Only the storage stability may be reduced slightly, i.e. remelted product should be used as soon as possible.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Phenyl isocyanate content | MDI-01-09 | mg/kg | max. 10 |
| Solidification temperature | MDI-01-17 | °C | < 15 |
| Density 25 °C | DIN 51 757 | g/cm3 | 1.22 |
| Vapor pressure at 20 °C (MDI) | hPa | < 10^-5 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Hydrolyzable chlorine (Cl) | MDI-01-04 | mg/kg | max. 50 |
| NCO | MDI-01-01 | % | 26.0 ± 1.0 |
| Viscosity 25 °C | MDI-01-02 | mPa*s | 120 ± 40 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
