Submit

Desmodur® E 744

Desmodur E 744 is an aromatic polyisocyanate prepolymer based on diphenylmethane-diisocyanate (MDI).

联系专家
i
市场转换
选择会影响你得到的结果。
复制到剪贴板

关于

材料类型

无可用数据

材料

无可用数据

一般特征

Desmodur E 744 is an aromatic polyisocyanate prepolymer based on diphenylmethane-diisocyanate (MDI).

储存条件

Desmodur E 744 prepolymer must be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react slowly with water to form polyureas and liberate carbon dioxide gas, which may cause sealed containers to expand and rupture. Partially filled containers should be blanketed with dry nitrogen.
Storage temperatures should be maintained between 21° to 35°C (70° to 95°F). Under these conditions, Desmodur E 744 will remain clear for up to six months. Within this range, lower storage temperatures will maximize the storage life of the product.
Desmodur E 744 prepolymer must not be allowed to freeze. Exposure to temperatures less than 21°C (70°F), even for short periods of time, can result in the formation of solid material. During the winter months, appropriate precautions must be taken during shipment and storage.
Prolonged storage of solid or partially solid Desmodur E 744 prepolymer may result in the formation of MDI dimer in amounts that exceed its solubility in the prepolymer at normal storage temperatures. This can make the product unusable. If solids form because of exposure to low temperatures, it may be possible to return Desmodur E 744 to a liquid by heating. Use a well-ventilated oven for the minimum time necessary to render it clear. The temperature of the product should not exceed 60°C (140°F). Agitation or drum rollers are recommended to avoid excessive local heating, which will degrade the product. As a result, the remelted prepolymer may be cloudy, and the processing behavior and/or properties of the final product may be affected.
The use of drum heaters is not recommended since the excessive heating cause dimerization, loss of NCO, and increase in viscosity.Significant amounts of MDI dimer may form during the heating process. As a result, the remelted prepolymer may be clou ... text to long! (max 2000 characters)

样品

无可用数据

包装类型

无可用数据

技术属性和数据表

属性名称 测试方法 单位 数值
Viscosity at 25oC mPa∙s 300 - 900
NCO content wt.-% 23.0 - 24.0

属性名称 测试方法 单位 数值
Equivalent weight avg. 179
Flash point PMCC °C 188
Density at 25oC lb/gal 10.1
Specific gravity at 25oC 1.21
Appearance Clear, brownish yellow liquid

下载

技术数据表
安全数据表
无可用直接下载,请访问 www.productsafetyfirst.covestro.com
Download

你想知道更多关于 Desmodur® E 744?
与我们的专家取得联系!

Contact form image Zoe

我们如何联系您?

* 必填字段

要比较1种产品