i
市场转换
选择会影响你得到的结果。
关于
材料类型
无可用数据
材料
无可用数据
一般特征
Desmodur E 30700 is an aliphatic ester groups containing prepolymer based on hexamethylene-1,6-diisocyanate (HDI).
It is suitable for use as a hardener for solvent-free polyurethane coatings.
It is suitable for use as a hardener for solvent-free polyurethane coatings.
储存条件
Desmodur E 30700 should be stored in tightly sealed original containers and protected from moisture, heat, and foreign materials. The product is sensitive to moisture and should therefore be stored in tightly sealed containers. Storage at elevated temperatures will lead to an increase in viscosity and a reduction of the NCO content. Recommended storage temperature is 20º-30ºC.
Storage at low temperature - below 20°C - may lead to turbidity and crystalline separation. By careful heating up to a maximum of 50 °C the product can usually be melted again. Afterwards the product has to be homogenized.
Storage at low temperature - below 20°C - may lead to turbidity and crystalline separation. By careful heating up to a maximum of 50 °C the product can usually be melted again. Afterwards the product has to be homogenized.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Density at 20 °C | g/cm^3 | approx. 1.11 | |
Flash point | °C | approx. 184 | |
NCO equivalent weight | g | approx. 380 |
命名属性规范
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
NCO content | % | approx. 11 | |
Viscosity at 23 °C | mPa∙s | approx. 1,350 | |
Monomer content | % | < 0.3 |
下载
-
技术数据表
-
安全数据表无可用直接下载,请访问 www.productsafetyfirst.covestro.com