i
市场转换
选择会影响你得到的结果。
关于
材料类型
- PIC
- MDI
- 预聚物
- 聚异氰酸酯
- 异氰酸酯
- 反应型体系
材料
- 涂料、油漆和油墨
- 无溶剂
一般特征
Modified polyisocyanate prepolymer based on diphenylmethane diisocyanate.
As a binder for the formulation of injection resins for sealing water-conveying cracks in structures above and below ground.
As a binder for the formulation of injection resins for sealing water-conveying cracks in structures above and below ground.
储存条件
- Storage in original sealed
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product must be stored in airtight containers. Contact with atmospheric moisture causes a reaction which results first in an increase in viscosity and ultimately in gelling. As storage at elevated temperatures also results in an increase in viscosity, the product should be stored in a cool place. At temperatures below 0 °C, the product may crystallize partially. However, the crystals can be remelted by careful heating.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Flash point | DIN EN ISO 2719 | °C | > 200 |
| Density at 20 °C | DIN EN ISO 2811-3 | g/cm3 | approx. 1.12 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| NCO content | M105-ISO 11909 | % | 15.7 ± 0.5 |
| Viscosity at 23 °C | M014-ISO 3219/A.3 | mPa*s | 1,100 ± 400 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
