Desmodur® CQ I
Monomeric cycloaliphatic diisocyanate, using alternative feedstocks attributed via mass balance (ISCC PLUS certified). In the manufacture of polyisocyanates and polyurethanes.
i
市场转换
选择会影响你得到的结果。
关于
材料类型
无可用数据
材料
无可用数据
一般特征
Monomeric cycloaliphatic diisocyanate, using alternative feedstocks attributed via mass balance (ISCC PLUS certified).
For the manufacture of the polyisocyanates and polyurethanes.
For the manufacture of the polyisocyanates and polyurethanes.
储存条件
- Storage in original sealed Covestro container.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Additional information regarding safe handling, transport and storage from isocyanates can be found in the guidelines from the ISOPA association.
- Recommended storage temperature: 0 - 30 °C.
- Protect from moisture, heat and foreign material.
General information: The product is sensitive to moisture. Storage at higher temperatures will result in increase of color and viscosity. Storage at significant lower temperatures will result in solidification. This solidification is reversible by briefly heating the product without adversely affecting the quality of the product.
Additional information regarding safe handling, transport and storage from isocyanates can be found in the guidelines from the ISOPA association.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Vapor pressure at 25 °C | hPa | approx. 1.2 x 10^-3 | |
| ^1 carbon not originating from primary fossil sources expressed as percentage of the total carbon. | |||
| Density at 20 °C | DIN EN ISO 2811 | g/ml | approx. 1.06 |
| Alternative carbon share ^1 (bio-circular, attributed) | calculated | % | 75 |
| Flash point | DIN EN 22 719 | °C | approx. 150 |
| Viscosity at 25 °C | DIN EN ISO 3219/A.3 | mPa*s | approx. 10 |
| ^2 elements not originating from primary fossil sources expressed as percentage of the total mass. | |||
| Alternative raw material share ^2 (bio-circular, attributed) | calculated | wt-% | 55 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Hydrolyzable chlorides | internal method | mg/kg | ≤ 160 |
| Total chlorides | internal method | mg/kg | ≤ 200 |
| Color value (Hazen) | DIN EN 1557 | ≤ 30 | |
| NCO content (calculated from GC) | internal method | % | ≥ 37.5 |
| Assay (GC) | internal method | % | ≥ 99.5 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
