i
市场转换
选择会影响你得到的结果。
关于
材料类型
无可用数据
材料
无可用数据
一般特征
Isocyanate component for two-component polyurethane resin for vacuum assisted resin transfer molding (VARTM).
Desmodur 44CP23 in combination with Baydur® 120V2 is intended for the production of fiber-reinforced composites.
For more details on processing please refer to the technical datasheet of the polyol component Baydur 120V2.
The polyurethane resin has a very low viscosity and a long pot life at ambient temperature and a fast cure at elevated temperature.
Desmodur 44CP23 in combination with Baydur® 120V2 is intended for the production of fiber-reinforced composites.
For more details on processing please refer to the technical datasheet of the polyol component Baydur 120V2.
The polyurethane resin has a very low viscosity and a long pot life at ambient temperature and a fast cure at elevated temperature.
储存条件
Drums should be protected against strong sunlight and always kept sealed to protect the contents from moisture or damp air.
Keep the container tightly closed in a well-ventilated place.
Recommended storage and transport temperature: 10 - 30 °C
Shelf life (ex works): 180 days if stored in sealed, moisture-tight containers
Keep the container tightly closed in a well-ventilated place.
Recommended storage and transport temperature: 10 - 30 °C
Shelf life (ex works): 180 days if stored in sealed, moisture-tight containers
样品
Moisture access should be prevented.
包装类型
无可用数据
技术属性和数据表
命名属性特征
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Density at 25 °C | calculated | g/ml | approx. 1.23 |
命名属性规范
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Viscosity at 25 °C | DIN EN ISO 3219/A.3 | mPa*s | 150 to 230 |
NCO-content | DIN EN ISO 11909 | % | 29,5 to 31,8 |
Viscosity at 25 °C | DIN EN ISO 3219/A.3 | mPa*s | 150 to 230 |
NCO-content | DIN EN ISO 11909 | % | 29,5 to 31,8 |
下载
-
技术数据表
-
安全数据表无可用直接下载,请访问 www.productsafetyfirst.covestro.com