i
市场转换
选择会影响你得到的结果。
关于
材料类型
无可用数据
材料
无可用数据
一般特征
Arcol® Polyol 1107 is a low VOC (volatile organic compounds) inactive propylene oxide/ethylene oxide polyether triol. It is used extensively in conventional flexible polyether slabstock foams, either as the standard base polyol, or in combination with other polyols, to achieve particular effects and foam properties.
储存条件
Recommended storage temperature (°C): 10 - 35
Product must be stored in in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Recommended temperature for processing (°C): 20 - 25.
Product must be stored in in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of
shipment as stated in the respective delivery documents, the product will meet
the values set forth in section "specification" above provided that the product is
stored in full compliance with the storage conditions and is otherwise handled
appropriately. The lapse of this period does not necessarily mean that the product no
longer meets specifications. However, prior to using said product, Covestro
recommends to test such a product if it still meets the specifications. Covestro
does not make any representation regarding the product after the period and
Covestro shall not be responsible or liable in any way for the product failing to
meet specifications after the period.
Recommended temperature for processing (°C): 20 - 25.
样品
Moisture access must be prevented when taking product samples.
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Density 25 °C | DIN 51757 | g/cm³ | 1.02 |
| Colour | colourless | ||
| Viscosity 25 °C | PET-10-01 | mPa*s | 500 - 620 |
命名属性规范
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Unsaturates | PET-18-01 | mAeq/g | ≤ 0.050 |
| Water content | PET-19-01 | % by wt. | ≤ 0.10 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 46 - 50 |
| Colour APHA | PET-06-01 | ≤ 40 | |
| Water content | PET-19-01 | % by wt. | ≤ 0.10 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 46 - 50 |
| Colour APHA | PET-06-01 | ≤ 40 | |
| Unsaturates | PET-18-01 | mAeq/g | ≤ 0.050 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com
