Submit
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
In die Zwischenablage kopiert

Über

Materialklassen

  • Nicht reaktives System

Material

Keine Daten verfügbar

Allgemeine Charakterisierung

Prism CM-200 solid polyurethane system is used in the reaction injection molding (RIM) process.

Lagerungsbedingungen

Isocyanate Component – Component A (MDI isocyanate) must be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react slowly with water to form ureas and liberate carbon dioxide gas, which may cause sealed containers to expand and rupture. Storage temperature should be maintained between 24°C and 30°C (75°F and 86°F).
Polyol Component – Component B (polyol) is hygroscopic and must be kept in tightly closed containers to prevent contamination with moisture and foreign materials, which can adversely affect processing. Storage temperatures should be maintained between 5°C and 37°C (40°F and 100°F). This polyol system will separate into phases without agitation. Therefore, it is important to mix it thoroughly prior to and during its use.
Some of the end-uses of the products described in this bulletin must comply with applicable regulations, such as FDA, NSF, USDA and CPSC. If you have questions on the regulatory status of this product, contact your Covestro representative or Regulatory Manager in Pittsburgh, PA.

Probenahme

Keine Daten verfügbar

Verpackungsart

Keine Daten verfügbar

Downloads

Technisches Datenblatt
Sicherheitsdatenblatt
Kein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
Download

Möchten Sie mehr über Prism® CM-200 erfahren?
Setzen Sie sich mit unseren Experten in Verbindung!

Contact form image Zoe

Wie können wir Sie kontaktieren?

* Pflichtfelder

1 Produkt für einen Vergleich