Hyperlite® Polyol 1650 - for flexible moulded foams
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
Über
Materialklassen
- Polyol
Material
Keine Daten verfügbar
Allgemeine Charakterisierung
Hyperlite® Polyol 1650 is a reactive polyol, modified with styrene-acrylonitrile polymer (SAN) with a solid content of approx. 43 % by weight. It is used as co-polyol for the production of flexible polyurethane cold-curing molded foam. Its typical application is automotive seating.
Lagerungsbedingungen
Recommended storage temperature (°C): 20 - 40
Porduct must be stored in sealed, moisture-tight containers. Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
Porduct must be stored in sealed, moisture-tight containers. Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Covestro represents that, for a period of 12 months following the day of shipment as stated in the respective delivery documents, the product will meet the values set forth in section "specification" above provided that the product is stored in full compliance with the storage conditions and is otherwise handled appropriately. The lapse of this period does not necessarily mean that the product no longer meets specifications. However, prior to using said product, Covestro recommends to test such a product if it still meets the specifications. Covestro does not make any representation regarding the product after the period and Covestro shall not be responsible or liable in any way for the product failing to meet specifications after the period.
Probenahme
Moisture access must be prevented when taking product samples.
Verpackungsart
Keine Daten verfügbar
Technische Eigenschaften & Datenblätter
Genannte Eigenschaften Merkmale
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Density 25 °C | DIN 51757 | g/cm³ | 1.05 |
Appearance | PET-03-04 | opaque white liquid | |
Viscosity 25 °C | PET-10-01 | mPa*s | 5500 |
Genannte Eigenschaften Spezifikation
Name der Eigenschaft | Prüfverfahren | Einheit | Wert |
---|---|---|---|
Water content | PET-19-01 | % by wt. | ≤ 0.06 |
Hydroxyl number | PET-11-01 | mg KOH/g | 18.2 - 22.2 |
Suspended matter | PET-03-03 | not present | |
Hydroxyl number | PET-11-01 | mg KOH/g | 18.2 - 22.2 |
Suspended matter | PET-03-03 | not present | |
Water content | PET-19-01 | % by wt. | ≤ 0.06 |
Downloads
-
Technisches Datenblatt
-
SicherheitsdatenblattKein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com