Submit
i
Markt wechseln
Die Auswahl beeinflusst die Ihnen angezeigten Ergebnisse.
In die Zwischenablage kopiert

Über

Materialklassen

  • TDI

Material

Keine Daten verfügbar

Allgemeine Charakterisierung

2,4- and 2,6-toluene diisocyanate (TDI) in the ratio 67 : 33.
As a raw material for polyurethane coatings and adhesives.

Lagerungsbedingungen

- Storage in original sealed Covestro container.

-
Recommended storage temperature: 18 - 40 °C.

-
Protect from moisture, heat and foreign material.

General information: The product is sensitive to moisture and heat. It should be protected against contact with atmospheric moisture. Prolonged storage at elevated temperatures may result in discoloration or in the formation of insoluble deposits. The product crystallizes partially or fully at temperatures below 5 °C. However, careful melting at up to 50 °C will reliquify the product without any detrimental effect on its quality. A contact temperature of 80 °C must not be exceeded. The reliquified product must be homogenized as crystallization causes a shift in the isomer ratio between the crystalline and the still liquid phases. Opened containers must be resealed after removing product. If stored for long periods, the product should be overlaid with nitrogen. The product reacts with water to release carbon dioxide. During storage, transfer and handling of the product, contact with water in any form (damp containers, solvents containing water, moist air) must be prevented as the generation of carbon dioxide may result in a dangerous increase in pressure. The polyureas which are formed at the same time may result in turbidity. They may also cause blockages and breakdowns in filters, pumps and pipes.

Probenahme

Keine Daten verfügbar

Verpackungsart

Keine Daten verfügbar

Technische Eigenschaften & Datenblätter

Name der Eigenschaft Prüfverfahren Einheit Wert
Hydrolysable chlorine TDI-01-03 mg/kg ≤ 100
Purity TDI-01-01 % ≥ 99.5
Acidity TDI-01-02 mg/kg ≤ 40
Content of 2,4'-TDI TDI-01-04 % 67 ± 1

Name der Eigenschaft Prüfverfahren Einheit Wert
Boiling point (1 bar) °C approx. 250
Density at 25 °C DIN 51 757 g/ml approx. 1.22
Viscosity at 25 °C DIN 53 015 mPa*s approx. 3
Solidification point DIN 53 175 °C approx. 5
Flash point DIN EN ISO 2719 °C approx. 130
Isocyanate content (by degree of purity method) % ≥ 48

Downloads

Technisches Datenblatt
Download
Sicherheitsdatenblatt
Kein direkter Download verfügbar, bitte besuchen Sie www.productsafetyfirst.covestro.com
Download

Ähnliche Themen

Möchten Sie mehr über Desmodur® T 65 N erfahren?
Setzen Sie sich mit unseren Experten in Verbindung!

Contact form image Zoe

Wie können wir Sie kontaktieren?

* Pflichtfelder

1 Produkt für einen Vergleich