Submit

Prism® CM-200

联系专家
i
市场转换
选择会影响你得到的结果。
复制到剪贴板

关于

材料类型

  • 非反应型体系

材料

无可用数据

一般特征

Prism CM-200 solid polyurethane system is used in the reaction injection molding (RIM) process.

储存条件

Isocyanate Component – Component A (MDI isocyanate) must be stored in tightly closed containers and protected from contamination with moisture and foreign materials, which can adversely affect processing. It will react slowly with water to form ureas and liberate carbon dioxide gas, which may cause sealed containers to expand and rupture. Storage temperature should be maintained between 24°C and 30°C (75°F and 86°F).
Polyol Component – Component B (polyol) is hygroscopic and must be kept in tightly closed containers to prevent contamination with moisture and foreign materials, which can adversely affect processing. Storage temperatures should be maintained between 5°C and 37°C (40°F and 100°F). This polyol system will separate into phases without agitation. Therefore, it is important to mix it thoroughly prior to and during its use.
Some of the end-uses of the products described in this bulletin must comply with applicable regulations, such as FDA, NSF, USDA and CPSC. If you have questions on the regulatory status of this product, contact your Covestro representative or Regulatory Manager in Pittsburgh, PA.

样品

无可用数据

包装类型

无可用数据

下载

技术数据表
安全数据表
无可用直接下载,请访问 www.productsafetyfirst.covestro.com
Download

你想知道更多关于 Prism® CM-200?
与我们的专家取得联系!

Contact form image Zoe

我们如何联系您?

* 必填字段

要比较1种产品