Submit

Makrolon® LED5101

MVR (300 °C/1.2 kg) 34 cm³/10 min; light guides; PC with highest transmission; low viscosity; easy release

联系专家
i
市场转换
选择会影响你得到的结果。
复制到剪贴板

关于

材料类型

无可用数据

材料

无可用数据

一般特征

无可用数据

储存条件

无可用数据

样品

无可用数据

包装类型

无可用数据

技术属性和数据表

属性名称 测试标准 测试标准 单位 数值
Burning behavior UL 94 UL 94 2.9 mm Class HB (CL)
Burning behavior UL 94 UL 94 0.75 mm Class V-2 (CL)
Burning rate (US-FMVSS) ISO 3795 >=1.0 mm mm/min passed
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Coefficient of linear thermal expansion, transverse ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Flash ignition temperature ASTM D1929 °C 480
Glass transition temperature ISO 11357-1,-2 10 °C/min °C 145
Glow wire test (GWFI) IEC 60695-2-12 1.0 mm °C 850 - 850
Glow wire test (GWFI) IEC 60695-2-12 1.5 mm °C 875
Glow wire test (GWFI) IEC 60695-2-12 3.0 mm °C 930
Glow wire test (GWIT) IEC 60695-2-13 0.75 mm °C 875
Glow wire test (GWIT) IEC 60695-2-13 1.5 mm °C 875
Glow wire test (GWIT) IEC 60695-2-13 3.0 mm °C 900
Oxygen index ISO 4589-2 Method A % 28
Relative temperature index (Electric strength) UL 746B 1.5 mm °C 125
Relative temperature index (Tensile impact strength) UL 746B 1.5 mm °C 115
Relative temperature index (Tensile strength) UL 746B 1.5 mm °C 125
Resistance to heat (ball pressure test) IEC 60695-10-2 °C 136
Self ignition temperature ASTM D1929 °C 550
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 138
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 125
Thermal conductivity, cross-flow ISO 8302 23 °C; 50 % r. h. W/(m*K) 0.2
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 146
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 145 - 145
属性名称 测试标准 测试标准 单位 数值
Ball indentation hardness ISO 2039-1 N/mm² 115
Charpy impact strength ISO 179-1eU -30 °C kJ/m² N
Charpy impact strength ISO 179-1eU -60 °C kJ/m² N
Charpy impact strength ISO 179-1eU 23 °C kJ/m² N
Charpy notched impact strength ISO 7391/b.o. ISO 179-1eA -30 °C; 3 mm kJ/m² 12C
Charpy notched impact strength ISO 7391/b.o. ISO 179-1eA 23 °C; 3 mm kJ/m² 60P(C)
Flexural modulus ISO 178 2 mm/min MPa 2350 - 2350
Flexural strain at flexural strength ISO 178 2 mm/min % 7.1 - 7.1
Flexural strength ISO 178 2 mm/min MPa 97
Flexural stress at 3.5 % strain ISO 178 2 mm/min MPa 73 - 73
Izod notched impact strength ISO 7391/b.o. ISO 180-A 23 °C; 3 mm kJ/m² 55P
Izod notched impact strength ISO 7391/b.o. ISO 180-A -30 °C; 3 mm kJ/m² 12C
Nominal strain at break ISO 527-1,-2 50 mm/min % > 50
Puncture energy ISO 6603-2 -30 °C J 60
Puncture energy ISO 6603-2 23 °C J 55 - 55
Puncture maximum force ISO 6603-2 -30 °C N 5900
Puncture maximum force ISO 6603-2 23 °C N 4900 - 4900
Strain at break b.o. ISO 527-1,-2 50 mm/min % 125
Stress at break ISO 527-1,-2 50 mm/min MPa 60
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2350 - 2350
Yield strain ISO 527-1,-2 50 mm/min % 6
Yield stress ISO 527-1,-2 50 mm/min MPa 63
属性名称 测试标准 测试标准 单位 数值
Haze for transparent materials ISO 14782 3 mm % < 0.5
Luminous transmittance (clear transparent materials) ISO 13468-2 1 mm % 90
Luminous transmittance (clear transparent materials) ISO 13468-2 2 mm % 90
Luminous transmittance (clear transparent materials) ISO 13468-2 4 mm % > 89
Luminous transmittance (clear transparent materials) ISO 13468-2 3 mm % > 89
Refractive index ISO 489 Procedure A 1.584
属性名称 测试标准 测试标准 单位 数值
Melt volume-flow rate ISO 1133 300 °C; 1.2 kg cm³/10 min 34
Molding shrinkage, normal ISO 294-4 60x60x2 mm; 500 bar % 0.7
Molding shrinkage, parallel ISO 294-4 60x60x2 mm; 500 bar % 0.65
属性名称 测试标准 测试标准 单位 数值
Comparative tracking index CTI IEC 60112 Solution A Rating 250
Comparative tracking index CTI M IEC 60112 Solution B Rating 125M
Dissipation factor IEC 60250 1 MHz 10^-4^ 95
Dissipation factor IEC 60250 100 Hz 10^-4^ 5
Electrical strength IEC 60243-1 1 mm kV/mm 34
Relative permittivity IEC 60250 1 MHz 3.0
Relative permittivity IEC 60250 100 Hz 3.1
Surface resistivity IEC 60093 Ohm 1E16
Volume resistivity IEC 60093 Ohm*m 1E14
属性名称 测试标准 测试标准 单位 数值
Injection molding-Injection velocity ISO 294 mm/s 200
Injection molding-Melt temperature ISO 294 °C 280 - 280
Injection molding-Mold temperature ISO 294 °C 80 - 80
属性名称 测试标准 测试标准 单位 数值
Bulk density ISO 60 Pellets kg/m³ 660
Density ISO 1183-1 kg/m³ 1190 - 1190
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.12
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.3

下载

技术数据表
安全数据表
无可用直接下载,请访问 www.productsafetyfirst.covestro.com
Download

你想知道更多关于 Makrolon® LED5101?
与我们的专家取得联系!

Contact form image Zoe

我们如何联系您?

* 必填字段

要比较1种产品