i
市场转换
选择会影响你得到的结果。
关于
材料类型
- 多元醇
材料
- 泡沫
- 块状
一般特征
Arcol® Polyol HS 100 is the secondary polyol in the Ultracel® technology for high resilience (HR) slabstock foam to provide additional loadbearing properties to Ultracel® 2009 polyol based foams.
Arcol® Polyol HS 100 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 45 % by weight.
It is specifically designed for increasing loadbearing properties of high resilience slabstock foams based on Ultracel® 2009. Up to 50 parts can be blended with Ultracel® 2009, in order to achieve HR foams with enhanced hardness.
Arcol® Polyol HS 100 can also be used for the production of conventional slabstock foams with very high loadbearing properties.
Arcol® Polyol HS 100 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 45 % by weight.
It is specifically designed for increasing loadbearing properties of high resilience slabstock foams based on Ultracel® 2009. Up to 50 parts can be blended with Ultracel® 2009, in order to achieve HR foams with enhanced hardness.
Arcol® Polyol HS 100 can also be used for the production of conventional slabstock foams with very high loadbearing properties.
储存条件
Recommended storage temperature (°C): 10 - 35.
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
样品
Moisture access must be prevented when taking product samples.
包装类型
无可用数据
技术属性和数据表
命名属性特征
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Flash point | DIN ISO 2719 | °C | 254 |
TDI basic value | pbw Desmodur® T80 on 100 pbw Arcol® Polyol HS 100 | 4.4 | |
Appearance | PET-03-04 | opaque white liquid | |
Pour point | DIN ISO 3016 | °C | -18 |
Density 25 °C | DIN 51757 | g/cm³ | approx. 1.05 |
Viscosity 25 °C | PET-10-01 | mPa*s | approx. 3300 |
命名属性规范
属性名称 | 测试方法 | 单位 | 数值 |
---|---|---|---|
Water content | PET-19-01 | % by wt. | ≤ 0.06 |
Water content | PET-19-01 | % by wt. | ≤ 0.06 |
Hydroxyl number | PET-11-01 | mg KOH/g | 26.2 - 30.2 |
Hydroxyl number | PET-11-01 | mg KOH/g | 26.2 - 30.2 |
下载
-
技术数据表
-
安全数据表无可用直接下载,请访问 www.productsafetyfirst.covestro.com