Submit
  • 塑料
  • 涂料、油漆和油墨
  • 3D打印
  • 泡沫

Addigy® GPC 3D1000C 000000

Additive manufacturing Polycarbonate grade for filament extrusion. Transparent, tough and rigid; easy processing, low viscosity

联系专家
i
市场转换
选择会影响你得到的结果。
复制到剪贴板

关于

材料类型

  • 聚碳酸酯

材料

3D打印
Good surface finish, Low warping, Easy printable, Good layer adhesion
塑料
透明
涂料、油漆和油墨
低粘性
泡沫
硬质

一般特征

无可用数据

储存条件

The product should be stored in its original packaging at all times.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.

样品

无可用数据

包装类型

无可用数据

技术属性和数据表

命名属性规范

属性名称 测试方法 单位 数值
Elongation at break xy-direction ISO 527-2(1 mm/min) % 4
Young’s Modulus xy-direction ISO 527-2(1 mm/min) MPa 2010
Melt volume rate 300 °C; 1.2 kg ISO 1133 cm^3 / 10 min 34
Vicat softening temperature 50 N; 50 °C/h ISO 306 °C 112
Tensile strength xy-direction ISO 527-2(200 mm/min) MPa 63
Appearance natural color
Impact strength yz-directionCharpy unnotched ISO 179-1 kJ/m^2 64
Density ISO 1183-1 kg/m^3 1210

下载

技术数据表
安全数据表
无可用直接下载,请访问 www.productsafetyfirst.covestro.com

你想知道更多关于 Addigy® GPC 3D1000C 000000?
与我们的专家取得联系!

Contact form image Zoe

我们如何联系您?

您希望了解哪种材料?

您希望进行哪种类型的查询?

如何联系您?

* 必填字段

Form data successfully sent

Compare