- 3D打印
- 泡沫
- 热塑性聚氨酯
Addigy® FPU 77D 000 A X1010
Additive manufacturing Thermoplastic Polyuethane grade for fused filament fabrication. Aromatic ether-based type; tough and rigid; transparent filament.
i
市场转换
选择会影响你得到的结果。
关于
材料类型
- TPU
材料
- 3D打印
- Good surface finish, Easy printable, Good layer adhesion, Good adhesion to printing bed
- 泡沫
- 硬质
- 热塑性聚氨酯
- 透明
一般特征
无可用数据
储存条件
The product should be stored in its original packaging at all times.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
样品
无可用数据
包装类型
无可用数据
技术属性和数据表
命名属性特征
| 属性名称 | 测试方法 | 单位 | 数值 |
|---|---|---|---|
| Tensile strength xy-direction | ISO 527-2(200 mm/min) | MPa | 27 |
| Density | ISO 1183-1 | kg/m^3 | 1190 |
| Shore hardness D | DIN ISO 7619-1 (1s) | 77 | |
| Elongation at break xy-direction | ISO 527-2(200 mm/min) | % | 282 |
| Appearance | natural color | ||
| Vicat softening temperature 10 N, 50 °C/h | ISO 306 | °C | 133 |
| Abrasion resistance | ISO 4649 method A | mm^3 | 52 |
| Young’s Modulus xy-direction | ISO 527-2(1 mm/min) | MPa | 435 |
下载
-
技术数据表
-
安全数据表无可用直接下载，请访问 www.productsafetyfirst.covestro.com