Impranil® DAA
Anionic aromatic polyester-polyurethane dispersion.
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Anionic aromatic polyether-polyurethane dispersion.
Impranil® DAA is suitable for the formulation of textile coatings and is used primarily as an adhesive coat, for use in numerous applications.
Impranil® DAA is suitable for the formulation of textile coatings and is used primarily as an adhesive coat, for use in numerous applications.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 5 - 30 °C.
- Protect fromfrost , heat and foreign material.
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
After extended storage time sedimentation can occur. The material can be proceeds without quality losses after homogenization.
- Recommended storage temperature: 5 - 30 °C.
- Protect from
General information: The product cannot be used if it has been frozen. The containers must be well closed to prevent the evaporation of water which may result in the formation of a non-redispersible film. Brief heating to max. 50 °C has no adverse effect on product properties.
After extended storage time sedimentation can occur. The material can be proceeds without quality losses after homogenization.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 23 °C | DIN EN ISO 2811/3 | g/cm3 | 1.1 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Non-volatile content, (0,9 – 1,1 g/1 h / 125 °C) | DIN EN ISO 3251 | % | 39 - 41 |
| Viscosity at 23 °C, Spindel L 2/30 U /min | DIN 53019 | mPa*s | < 1,000 |
| pH-value | DIN ISO 976 | 6.0 - 9.0 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
