Submit

Makrolon® TC210

values based on lab or small scale production; moderate thermal conductivity; electrical/electronic

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

No data available

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Dry Air Drying Temperature - °C 120
Dry Air Drying Time - h 4
Property Name Standard Test condition Unit Value
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.5
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.3
Glow wire test (GWFI) IEC 60695-2-12 1.5 mm °C 850
Glow wire test (GWIT) IEC 60695-2-13 1.5 mm °C 850
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 144
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 136
Thermal conductivity, normal ASTM E1461 23 °C; 50 % r. h. W/(m*K) 1.4
Thermal conductivity, parallel ASTM E1461 23 °C; 50 % r. h. W/(m*K) 0.3
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 146
Property Name Standard Test condition Unit Value
Ball indentation hardness ISO 2039-1 N/mm² 128
Charpy impact strength ISO 179-1eU 23 °C kJ/m² 12
Flexural modulus ISO 178 2 mm/min MPa 8700
Flexural strain at flexural strength ISO 178 2 mm/min % 1.5
Flexural strength ISO 178 2 mm/min MPa 80
Flexural stress at 3.5 % strain ISO 178 2 mm/min MPa 0
Nominal strain at break ISO 527-1,-2 5 mm/min % 1.4
Puncture energy ISO 6603-2 23 °C J 3
Puncture impact properties - maximum force ISO 6603-2 23 °C N 600
Stress at break ISO 527-1,-2 5 mm/min MPa 49
Tensile modulus ISO 527-1,-2 1 mm/min MPa 7800
Yield strain ISO 527-1,-2 5 mm/min % 0
Yield stress ISO 527-1,-2 5 mm/min MPa 0
Property Name Standard Test condition Unit Value
Melt viscosity b.o. ISO 11443-A 1000 s^-1^/ 300 °C Pa*s 180
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 4
Molding shrinkage, normal ISO 294-4 60x60x2 mm % 0.3 - 0.4
Property Name Standard Test condition Unit Value
Electrical strength IEC 60243-1 1 mm kV/mm 40
Surface resistivity IEC 60093 Ohm >=E+16
Volume resistivity IEC 60093 Ohm*m >=E+16
Property Name Standard Test condition Unit Value
Injection molding - Melt temperature ISO 294 °C 300
Injection molding - Mold temperature ISO 294 °C 90
Property Name Standard Test condition Unit Value
Density ISO 1183-1 kg/m³ 1560

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Download

Related topics

Do you want to know more about Makrolon® TC210?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

Compare