Submit
  • Plastics

Makrolon® FR6005

MVR (300 °C/1.2 kg) 9.0 cm³/10 min; medium viscosity; easy release; flame retardant; impact modified; good surface quality; electrical/electronic; housing parts

Contact expert Request a sample Request a quote
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

Plastics
Impact resistant, Flame retardant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Barrel Temperatures - Front - °C 280 - 290
Barrel Temperatures - Middle - °C 270 - 280
Barrel Temperatures - Nozzle - °C 290 - 300
Barrel Temperatures - Rear - °C 250 - 260
Dry Air Drying Temperature - °C 120
Dry Air Drying Time - h 2 - 3
Hold Pressure (% of injection pressure) - % 50 - 75
Melt temperatures - °C 280 - 320
Moisture Content max. (%) - % <= 0,02
Mold Temperatures - °C 80 - 120
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt temperature - °C 300
Vent Depth - mm 0.025 - 0.075
Property Name Standard Test condition Unit Value
Burning behavior UL 94 UL 94 1.2 mm (BK) Class V-0
Burning behavior UL 94 [UL recognition] UL 94 1.5 mm Class V-0
Burning behavior UL 94 [UL recognition] UL 94 1.0 mm (BK) Class V-0
Burning behavior UL 94 [UL recognition] UL 94 3.0 mm Class V-0
Burning behavior UL 94 [UL recognition] UL 94 1.2 mm Class V-1
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.7
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.7
Glow wire test (GWFI) IEC 60695-2-12 1.0 mm °C 850
Glow wire test (GWFI) IEC 60695-2-12 1.5 mm °C 960
Glow wire test (GWFI) IEC 60695-2-12 3.0 mm °C 960
Glow wire test (GWIT) IEC 60695-2-13 1.0 mm °C 875
Glow wire test (GWIT) IEC 60695-2-13 1.5 mm °C 850
Glow wire test (GWIT) IEC 60695-2-13 3.0 mm °C 900
Relative temperature index (Electric strength) UL 746B 0.75 mm °C 115
Relative temperature index (Tensile impact strength) UL 746B 0.75 mm °C 105
Relative temperature index (Tensile strength) UL 746B 0.75 mm °C 115
Resistance to heat (ball pressure test) IEC 60695-10-2 °C 134
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 136
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 121
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 144
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 142
Property Name Standard Test condition Unit Value
Charpy notched impact strength ISO 21305/based on ISO 179/1eA 23 °C kJ/m² 68P
Charpy notched impact strength ISO 21305/based on ISO 179/1eA -10 °C kJ/m² 50C
Charpy notched impact strength ISO 21305/based on ISO 179/1eA -30 °C kJ/m² 20C
Flexural modulus ISO 178 2 mm/min MPa 2400
Flexural strength ISO 178 2 mm/min MPa 90
Izod notched impact strength ISO 21305/based on ISO 180/A 23 °C/ 3 mm kJ/m² 60P
Izod notched impact strength ISO 21305/based on ISO 180/A -30 °C/ 3 mm kJ/m² 15C
Nominal strain at break ISO 527-1,-2 50 mm/min % > 50
Puncture energy ISO 6603-2 -30 °C J 55
Puncture energy ISO 6603-2 23 °C J 54
Puncture impact properties - maximum force ISO 6603-2 -30 °C N 6100
Puncture impact properties - maximum force ISO 6603-2 23 °C N 5100
Strain at break b.o. ISO 527-1,-2 50 mm/min % 135
Stress at break ISO 527-1,-2 50 mm/min MPa 66
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2300
Yield strain ISO 527-1,-2 50 mm/min % 6
Yield stress ISO 527-1,-2 50 mm/min MPa 62
Property Name Standard Test condition Unit Value
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 9
Molding shrinkage, parallel/normal b.o. ISO 2577 Value range based on general practical experience % 0.6 - 0.8
Property Name Standard Test condition Unit Value
Comparative tracking index CTI IEC 60112 Solution A Rating 200
Surface resistivity IEC 62631-3-2 Ohm 4E17
Volume resistivity IEC 62631-3-1 Ohm*m 9E16
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 200
Injection molding - Melt temperature ISO 294 °C 300
Injection molding - Mold temperature ISO 294 °C 80
Property Name Standard Test condition Unit Value
Density ISO 1183-1 kg/m³ 1200

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com

Do you want to know more about Makrolon® FR6005?
Get in touch with our experts!

How would you describe yourself?

What type of material are you interested in?

What type of industry are you interested in?

What type of inquiry is this?

How can we contact you?

* Mandatory Fields

{"FieldName":"","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}
Request a sample
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a sample

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Request a quote
formVersion
{"FieldName":"productName","Endpoint":"https://covestro-prod-ffm.apimanagement.eu2.hana.ondemand.com/hybrispcm/products_typeahead?identKey=GB6LiyNSG0YYxXXEpmO8EyoUdFLN0Roi&max=5&lang=en&extended=true","Language":"en","PermissionQuery":"","BrandLabel":"Brand","ProductLabel":"Product","NoResultLabel":"No results for","MaxItem":10}

Request a quote

Hello! Thanks for reaching out to us.
We have received your request and one of our experts will be in touch with you as soon as possible.
In the meantime, feel free to discover our innovative material solutions!

Speak to you soon,
Your Covestro Team

Compare