Submit

Makrolon® AX2475

MVR (300 °C/1.2 kg) 19 cm³/10 min; low viscosity; easy release; developed for high-gloss surfaces with highest requirements; for the use in combination with hard coatings

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

No data available

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 136
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 124
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 143
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 141
Property Name Standard Test condition Unit Value
Charpy impact strength ISO 179/1eU -30 °C kJ/m² N
Charpy impact strength ISO 179/1eU 23 °C kJ/m² N
Flexural modulus ISO 178 2 mm/min MPa 2350
Flexural strength ISO 178 2 mm/min MPa 98
Izod notched impact strength ISO21305/b.o. ISO 180/A 23 °C/ 3 mm kJ/m² 60P(C)
Izod notched impact strength ISO21305/b.o. ISO 180/A -30 °C/ 3 mm kJ/m² 12C
Nominal strain at break ISO 527-1,-2 50 mm/min % > 50
Strain at break b.o. ISO 527-1,-2 50 mm/min % 120
Stress at break ISO 527-1,-2 50 mm/min MPa 65
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2400
Yield strain ISO 527-1,-2 50 mm/min % 6
Yield stress ISO 527-1,-2 50 mm/min MPa 66
Property Name Standard Test condition Unit Value
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 19
Molding shrinkage, normal ISO 294-4 60x60x2 mm/ 500 bar % 0.7
Molding shrinkage, normal ISO 294-4 60x60x2 mm/ 500 bar % 0.65
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 200
Injection molding - Melt temperature ISO 294 °C 280
Injection molding - Mold temperature ISO 294 °C 80

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Download

Related topics

Do you want to know more about Makrolon® AX2475?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

Compare