Submit

Makrolon® 2458

MVR (300 °C/1.2 kg) 19 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; easy release

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

No data available

General Characterization

No data available

Hazard Information according to EU-CLP Regulation

Класове опасности / категории опасности

Съгласно регламент (ЕО) № 1272/2008 относно класифицирането, етикетирането и опаковането на вещества и смеси ('регламент CLP')

  • Не е класифициран съгласно Наредба (EC) No. 1272/2008.

třídy nebezpečnosti / kategorie nebezpečnosti

Podle Nařízení (ES) č. 1272/2008 o klasifikaci, označování a balení látek a směsí („Nařízení CLP“)

  • Žádná klasifikace v souladu se Směrnicí (EC) č. 1272/2008.

Fareklasser / farekategorier

Iht. forordning (EU) nr. 1272/2008 om klassificering, mærkning og emballering af stoffer og blandinger ('CLP-forordningen')

  • Ingen klassificering i henhold til forordning (EF) nr. 1272/2008.

Gefahrenklassen / Gefahrenkategorien

Gemäß Verordnung (EG) Nr. 1272/2008 über die Einstufung, Kennzeichnung

  • und Verpackung von Stoffen und Gemischen (die 'CLP-Verordnung')
  • Keine Einstufung nach der Verordnung (EG) Nr. 1272/2008.

Τάξεις κινδύνων / Κατηγορίες κινδύνων

Σύμφωνα με τον κανονισμό αρ. 1272/2008 της ΕΚ για την ταξινόμηση, την

  • επισήμανση και τη συσκευασία των ουσιών και μιγμάτων ('Κανονισμός CLP')
  • Καμία ταξινόμηση σύμφωνα με το την Οδηγία (EΚ) Αρ. 1272/2008.

Hazard Classes / Hazard Categories

According to Regulation (EC) No 1272/2008 on classification, labelling

  • and packaging of substances and mixtures (the 'CLP Regulation')
  • No classification in accordance with the Regulation (EC) No. 1272/2008.

Clases de peligro / Categorías de peligro

Conforme al Reglamento (CE) n.º 1272/2008 sobre clasificación, etiquetado y envasado de sustancias y mezclas (Reglamento CLP)

  • Sin clasificar conforme a la normativa (CE) Nº 1272/2008.

Ohuklassid / Ohukategooriad

Vastavalt määrusele (EÜ) nr 1907/2006, mis käsitleb ainete ja segude klassifitseerimist, märgistamist ja pakendamist („CLP-määrus”)

  • Vastavalt direktiivile (EÜ) nr 1272/2008 klassifikatsioon puudub.

Vaarallisuusryhmät / Vaarallisuusluokat

Aineiden ja seosten luokitusta, merkintää ja pakkausta koskevan Euroopan

  • parlamentin ja neuvoston asetuksen (EY) N:o 1272/2008
  • ("CLP-asetus")mukaan
  • Tuotetta ei luokitella vaaralliseksi aineeksi tai seokseksi EY-asetuksen N:o 1272/2008 mukaan.

Classes de danger / Catégories de danger

Selon le règlement (CE) n° 1272/2008 relatif à la classification,

  • l'étiquetage et l'emballage de substances et mélanges (le « règlement
  • CLP »)
  • Pas de classement conformément à la directive n° 1272/2008 (CE).

Razredi opasnosti / kategorije opasnosti

U skladu s Uredbom (EZ) br. 1272/2008 o razvrstavanju, označavanju i pakiranju tvari i smjesa ("CLP uredba")

  • Nema klasifikacije u skladu s Direktivom (EC) br. 1272/2008.

Veszélyességi osztályok / veszélyességi kategóriák

Az anyagok és keverékek osztályozásáról, címkézéséről és csomagolásáról

  • szóló 1272/2008/EK rendelet (a továbbiakban: CLP-rendelet) szerint
  • Nincs osztályozva (EK) a 1272/2008 számú rendelet szerint.

Classi di pericolo / Categorie di pericolo

Secondo regolamento (EC) n. 1272/2008 relativo alla classificazione,

  • all'etichettatura e all'imballaggio delle sostanze e delle miscele
  • (regolamento 'CLP')
  • Nessuna classificazione in base al Regolamento CE n. 1272/2008.

Pavojingumo klasės / Pavojingumo kategorijos

Pagal reglamentą (EB) Nr. 1272/2008 dėl cheminių medžiagų ir mišinių klasifikavimo, ženklinimo ir pakavimo (KŽP reglamentas)

  • Neklasifikuojama pagal (EB) direktyvą Nr. 1272/2008.

Bīstamības klases / bīstamības kategorijas

Saskaņā ar Regulu (EK) Nr. 1272/2008 par vielu un maisījumu klasificēšanu, marķēšanu un iepakošanu (CLP regulu)

  • Klasifikācija saskaņā ar Direktīvu (EK) Nr. 1272/2008 nav noteikta.

Gevarenklassen / Gevarencategorieën

Overeenkomstig verordening (EG) nr. 1272/2008 betreffende

  • classificering, etikettering en verpakking van stoffen en mengsels (de
  • "CLP-verordening")
  • Geen indeling volgens Verordening (EG) nr. 1272/2008.

Fareklasser / farekategorier

Iht. regulering (EC) nr 1272/2008 om klassifisering, merking og pakking av substanser og blandinger ('CLP regulering')

  • Ingen klassifisering i henhold til forordning (EF) nr. 1272/2008.

Klasy zagrożenia / Kategorie zagrożenia

Zgodnie z rozporządzeniem (WE) nr 1272/2008 w sprawie klasyfikacji,

  • oznakowania i pakowania substancji i mieszanin („Rozporządzenie CLP”)
  • Brak klasyfikacji zgodnie z Dyrektywą (WE) nr 1272/2008.

Classes de Risco / Categorias de Risco

De acordo com a regulamentação (EC) No. 1272/2008 sobre a classificação,

  • rotulação e o embalamento de substâncias e misturas (a "regulamentação
  • CLP")
  • Sem classificação de acordo com GHS.

Clase de risc / categorii de risc

Conform Regulamentului CE 1272/2008 privind clasificarea, etichetarea și

  • ambalarea substanțelor și a amestecurilor („Regulamentul CLP”)
  • Nicio clasificare în conformitate cu Directiva (CE) Nr. 1272/2008.

класс/категория опасности

Согласно Регламенту (ЕС) № 1272/2008 о классификации, маркировке и упаковке химических веществ и смесей («Регламент CLP»)

  • Не классифицируется в соответствии с Директивой (EC) No. 1272/2008.

Klase opasnosti / kategorije opasnosti

U skladu sa Uredbom (EZ) br. 1272/2008 o klasifikaciji, obeležavanju i pakovanju supstanci i smeša ('CLP uredba')

  • Bez klasifikacije u skladu sa Direktivom (EK) br. 1272/2008.

Triedy nebezpečenstva / kategórie nebezpečenstva

V súlade s nariadením (ES) č. 1272/2008 o klasifikácii, označovaní a balení látok a zmesí (nariadenie CLP)

  • Žiadne zaradenie podľa nariadenia č. 1272/2008/ES.

Razredi nevarnosti / kategorije nevarnosti

V skladu z Uredbo (ES) št. 1272/2008 o razvrščanju, označevanju in pakiranju snovi ter zmesi ("Uredba CLP")

  • Ni razvrstitve v skladu z Direktivo (ES) št. 1272/2008.

Faroklasser/farokategorier

Enligt förordning (EC) nr 1272/2008 avseende klassificering, märkning

  • och förpackning av substanser och blandningar ('CLP-förordningen')
  • Ingen klassificering i enlighet med förordning (EG) nr 1272/2008.

Tehlike sınıfı / Tehlike kategorisi

Maddelerin karışımı hakkında 1272/2008 numaralı (AB) talimatnamesi (CLP

  • Talimatnamesi) doğrultusunda sınıflandırılmış, ambalajlanmış,
  • etiketlenmiş ve paketlenmiştir.
  • Direktif (EC) No. 1272/2008’e göre bir sınıflandırması yoktur.

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Barrel Temperatures - Front - °C 280 - 290
Barrel Temperatures - Middle - °C 270 - 280
Barrel Temperatures - Nozzle - °C 290 - 300
Barrel Temperatures - Rear - °C 250 - 260
Dry Air Drying Temperature - °C 120
Dry Air Drying Time - h 2 - 3
Hold Pressure (% of injection pressure) - % 50 - 75
Melt temperatures - °C 280 - 320
Moisture Content max. (%) - % <= 0,02
Mold Temperatures - °C 80 - 120
Peripheral Screw Speed - m/s 0.05 - 0.2
Plastic Back Pressure (specific) - bar 50 - 150
Shot-to-Cylinder Size - % 30 - 70
Standard Melt temperature - °C 300
Vent Depth - mm 0.025 - 0.075
Property Name Standard Test condition Unit Value
Coefficient of linear thermal expansion, normal ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Coefficient of linear thermal expansion, parallel ISO 11359-1,-2 23 to 55 °C 10^-4^/K 0.65
Flash ignition temperature ASTM D1929 °C 480
Glass transition temperature ISO 11357-1,-2 10 °C/min °C 146
Oxygen index ISO 4589-2 Method A % 28
Resistance to heat (ball pressure test) IEC 60695-10-2 °C 138
Self ignition temperature ASTM D1929 °C 550
Temperature of deflection under load ISO 75-1,-2 0.45 MPa °C 139
Temperature of deflection under load ISO 75-1,-2 1.80 MPa °C 125
Thermal conductivity, through-plane ISO 8302 23 °C; 50 % r. h. W/(m*K) 0.2
Vicat softening temperature ISO 306 50 N; 120 °C/h °C 146
Vicat softening temperature ISO 306 50 N; 50 °C/h °C 145
Property Name Standard Test condition Unit Value
Ball indentation hardness ISO 2039-1 N/mm² 115
Charpy impact strength ISO 179/1eU -60 °C kJ/m² N
Charpy impact strength ISO 179/1eU 23 °C kJ/m² N
Charpy notched impact strength ISO 21305/based on ISO 179/1eA -30 °C/ 3 mm kJ/m² 14C
Charpy notched impact strength ISO 21305/based on ISO 179/1eA 23 °C/ 3 mm kJ/m² 65P
Flexural modulus ISO 178 2 mm/min MPa 2350
Flexural strain at flexural strength ISO 178 2 mm/min % 7.1
Flexural strength ISO 178 2 mm/min MPa 97
Flexural stress at 3.5 % strain ISO 178 2 mm/min MPa 73
Izod notched impact strength ISO 21305/based on ISO 180/A 23 °C/ 3 mm kJ/m² 65P
Izod notched impact strength ISO 21305/based on ISO 180/A -30 °C/ 3 mm kJ/m² 15C
Nominal strain at break ISO 527-1,-2 50 mm/min % > 50
Puncture energy ISO 6603-2 -30 °C J 65
Puncture energy ISO 6603-2 23 °C J 55
Puncture impact properties - maximum force ISO 6603-2 -30 °C N 6000
Puncture impact properties - maximum force ISO 6603-2 23 °C N 5100
Strain at break b.o. ISO 527-1,-2 50 mm/min % 130
Stress at break ISO 527-1,-2 50 mm/min MPa 70
Tensile creep modulus ISO 899-1 1 h MPa 2200
Tensile creep modulus ISO 899-1 1000 h MPa 1900
Tensile modulus ISO 527-1,-2 1 mm/min MPa 2400
Yield strain ISO 527-1,-2 50 mm/min % 6.1
Yield stress ISO 527-1,-2 50 mm/min MPa 65
Property Name Standard Test condition Unit Value
Haze for transparent materials ISO 14782 3 mm % < 0.8
Luminous transmittance (clear transparent materials) ISO 13468-2 1 mm % 89
Luminous transmittance (clear transparent materials) ISO 13468-2 2 mm % 89
Luminous transmittance (clear transparent materials) ISO 13468-2 4 mm % 87
Luminous transmittance (clear transparent materials) ISO 13468-2 3 mm % 88
Refractive index ISO 489 Procedure A 1.586
Property Name Standard Test condition Unit Value
Melt mass-flow rate ISO 1133 300 °C/ 1.2 kg g/10 min 20
Melt volume-flow rate ISO 1133 300 °C/ 1.2 kg cm³/10 min 19
Molding shrinkage, normal ISO 294-4 60x60x2 mm/ 500 bar % 70
Molding shrinkage, parallel ISO 294-4 60x60x2 mm/ 500 bar % 0.65
Molding shrinkage, parallel/normal b.o. ISO 2577 Value range based on general practical experience % 0.5 - 0.7
Property Name Standard Test condition Unit Value
Comparative tracking index CTI IEC 60112 Solution A Rating 250
Dissipation factor IEC 60250 1 MHz 10^-4^ 90
Dissipation factor IEC 60250 100 Hz 10^-4^ 5
Electrical strength IEC 60243-1 1 mm kV/mm 34
Relative permittivity IEC 60250 1 MHz 3.0
Relative permittivity IEC 60250 100 Hz 3.1
Surface resistivity IEC 60093 Ohm 1E16
Volume resistivity IEC 60093 Ohm*m 1E14
Property Name Standard Test condition Unit Value
Injection molding - Injection velocity ISO 294 mm/s 200
Injection molding - Melt temperature ISO 294 °C 280
Injection molding - Mold temperature ISO 294 °C 80
Property Name Standard Test condition Unit Value
Bulk density ISO 60 Pellets kg/m³ 660
Density ISO 1183-1 kg/m³ 1200
Water absorption (equilibrium value) ISO 62 23 °C; 50 % r. h. % 0.12
Water absorption (saturation value) ISO 62 Water at 23 °C % 0.3

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Secant modulus - Strain Makrolon® 2458 (Multipoint Data Sheet) Sekantenmodul-Dehnung Makrolon® 2458 (Multipoint Data Sheet)
Specific Volume-Temperature (pvT) Makrolon® 2458 (Multipoint Data Sheet) Spezifisches Volumen-Temperatur (pvT) Makrolon® 2458 (Multipoint Data Sheet)
Stress-Strain Makrolon® 2458 (Multipoint Data Sheet) Spannung-Dehnung Makrolon® 2458 (Multipoint Data Sheet)
Viscosity Shear Rate Makrolon® 2458 (Multipoint Data Sheet) Viskosität Schergeschwindigkeit Makrolon® 2458 (Multipoint Data Sheet)

Related topics

Do you want to know more about Makrolon® 2458?
Get in touch with our experts!

Contact form image Zoe

How would you describe yourself?

What type of material are you interested in?

What type of inquiry is this?

How can we contact you?

* Mandatory Fields

Compare