- Adhesives
Dispercoll® U 2824 XP
Aqueous anionic polyurethane dispersion for the formulation of adhesive dispersions. Contains carboxyl groups in the polymer chain and is crosslinkable with the polycarbodiimide from Desmodur® XP 2802.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Dispersion
- PU dispersion
- PU dispersion - high molecular
- Waterbased dispersion
Material
- Adhesives
- Waterborne, Fast bonding, Heat activated, Moisture resistant, Heat resistant
General Characterization
Dispercoll U 2824 XP is an aqueous polyurethane dispersion.
Dispercoll U 2824 XP is a waterborne dispersion of an anionically modified polyurethane. It is a raw material for the formulation of adhesive dispersions. Dispercoll U 2824 XP contains carboxyl groups in the polymer chain that can be crosslinked with the polycarbodiimide from Desmodur® XP 2802 to produce high-quality adhesive bonds.
Dispercoll U 2824 XP is a waterborne dispersion of an anionically modified polyurethane. It is a raw material for the formulation of adhesive dispersions. Dispercoll U 2824 XP contains carboxyl groups in the polymer chain that can be crosslinked with the polycarbodiimide from Desmodur® XP 2802 to produce high-quality adhesive bonds.
Storage Conditions
Dispercoll U 2824 XP should be stored in tightly sealed original containers and protected from direct sunlight, freezing, heat, and foreign materials. The product is sensitive to freezing. Freezing can damage the product irreversibly. Temperatures higher than 30°C should be avoided. Prolonged storage at higher temperatures may affect the product properties. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film. Recommended storage temperature is 5º-23ºC.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Property Name | Test Method | Unit | Value |
---|---|---|---|
Non-volatile content (1g/1h/125°C) | % | 38 - 41 | |
Viscosity at 23^oC(spindle L 2 / 30 rpm) | mPa∙s | 50 - 1,000 | |
pH value | 6.0 - 9.0 |
Property Name | Test Method | Unit | Value |
---|---|---|---|
Density | g/cm^3 | approx. 1.1 | |
Minimum film forming temperature | °C | approx. 5 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com