• Thermoplastic Polyurethane

Desmopan 9648DU

Extrusion- and injection molding grade; with special UV stabilizers; transparent up to 6 mm wall thickness; very good hydrolysis and microbial resistance; Application; Ski boot shells; Hoses, non-reinforced

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

Thermoplastic Polyurethane
Chemical resistant, Scratch resistant, Cold-flexibility, Abrasion resistant, Tear resistant, Wear resistant, Weather resistant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Maximum drying temperature - °C 110
射出成形-溶融温度 - °C 215 - 235
射出成形-金型温度 - °C 40 - 60
押出-溶融温度 - °C 200 - 235
Property Name Standard Test condition Unit Value
Tensile storage modulus ISO 6721-1,-4 -20 °C MPa 860
Tensile storage modulus ISO 6721-1,-4 20 °C MPa 133
Tensile storage modulus ISO 6721-1,-4 60 °C MPa 52
Property Name Standard Test condition Unit Value
Compression set DIN ISO 815-1, Method A 24 h; 70 °C % 45
Compression set DIN ISO 815-1 72 h; 23 °C % 38
Compression set DIN ISO 815-1, Method C 24 h; 70 °C % 27
Rebound resilience ISO 4662 % 33
Tear strength ISO 34-1 500 mm/min kN/m 114
Ultimate tensile strength DIN 53504 200 mm/min MPa 518
ショア硬度A DIN ISO 7619-1 1s 94
ショア硬度D DIN ISO 7619-1 1s 48
引張り破断伸び率 DIN 53504 200 mm/min % 431
強度 (10%伸び時) DIN 53504 200 mm/min MPa 5,1
強度 (100%伸び時) DIN 53504 200 mm/min MPa 15,8
強度 (300%伸び時) DIN 53504 200 mm/min MPa 31,8
強度 (50%伸び時) DIN 53504 200 mm/min MPa 11,7
曲げ弾性率 ISO 178 2 mm/min MPa 60
耐摩耗性 ISO 4649 method A mm³ 20
Property Name Standard Test condition Unit Value
密度 ISO 1183-1 kg/m³ 1160

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Compare