• Thermoplastic Polyurethane

Desmopan 6064A

injection molding grade; free from plasticizers; easy flowing; very good hydrolysis and microbial resistance; low abrasion; automotive interior applications; hard - soft systems; Shoe soles

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

No data available

Material

Thermoplastic Polyurethane
Soft touch, Chemical resistant, Scratch resistant, Cold-flexibility, Abrasion resistant, Tear resistant, Wear resistant

General Characterization

No data available

Storage Conditions

No data available

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Standard Test condition Unit Value
Maximum drying temperature - °C 90
射出成形-溶融温度 - °C 200 - 220
射出成形-金型温度 - °C 20 - 40
Property Name Standard Test condition Unit Value
Tensile storage modulus ISO 6721-1,-4 -20 °C MPa 42
Tensile storage modulus ISO 6721-1,-4 20 °C MPa 7
Tensile storage modulus ISO 6721-1,-4 60 °C MPa 5
Property Name Standard Test condition Unit Value
Compression set DIN ISO 815-1, Method A 24 h; 70 °C % 41
Compression set DIN ISO 815-1 72 h; 23 °C % 19
Compression set DIN ISO 815-1, Method C 24 h; 70 °C % 35
Rebound resilience ISO 4662 % 45
Tear strength ISO 34-1 500 mm/min kN/m 29
Ultimate tensile strength DIN 53504 200 mm/min MPa 23
ショア硬度A DIN ISO 7619-1 1s 67
引張り破断伸び率 DIN 53504 200 mm/min % 970
強度 (100%伸び時) DIN 53504 200 mm/min MPa 3,2
強度 (300%伸び時) DIN 53504 200 mm/min MPa 6
耐摩耗性 ISO 4649 method A mm³ 33
Property Name Standard Test condition Unit Value
密度 ISO 1183-1 kg/m³ 1090

Downloads

Technical Data Sheet
Download
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Compare