- Thermoplastic Polyurethane
Desmopan 453 DPS 041
injection molding grade; grease and oil-resistant; hydrolysis-stabilised; low compression set; good wear resistance; Application; Injection molded engineering parts; Automotive engineering; Coupling elements
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
- Thermoplastic Polyurethane
- Chemical resistant, Scratch resistant, Cold-flexibility, Abrasion resistant, Tear resistant, Wear resistant
General Characterization
No data available
Storage Conditions
No data available
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| Maximum drying temperature | - | °C | 110 | |
| 注塑-模具温度 | - | °C | 20 - 40 | |
| 注塑-熔体温度 | - | °C | 220 - 240 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 拉伸储能模量 | ISO 6721-1,-4 | -20 °C | MPa | 1780 |
| 拉伸储能模量 | ISO 6721-1,-4 | 20 °C | MPa | 240 |
| 拉伸储能模量 | ISO 6721-1,-4 | 60 °C | MPa | 110 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 10% 应变时的应力 | DIN 53504 | 200 mm/min | MPa | 8,2 |
| 100% 应变时的应力 | DIN 53504 | 200 mm/min | MPa | 18,3 |
| 300% 应变时的应力 | DIN 53504 | 200 mm/min | MPa | 30,6 |
| 50% 应变时的应力 | DIN 53504 | 200 mm/min | MPa | 15,1 |
| 压缩率 | DIN ISO 815-1, Method A | 24 h; 70 °C | % | 27 |
| 压缩率 | DIN ISO 815-1 | 72 h; 23 °C | % | 15 |
| 回弹力 | ISO 4662 | % | 30 | |
| 撕裂强度 | ISO 34-1 | 500 mm/min | kN/m | 180 |
| 断裂应变 | DIN 53504 | 200 mm/min | % | 472 |
| 最终拉伸强度 | DIN 53504 | 200 mm/min | MPa | 37.9 |
| 耐磨性 | ISO 4649 method A | mm³ | 32 | |
| 邵氏硬度 A | DIN ISO 7619-1 | 1s | 97 | |
| 邵氏硬度 D | DIN ISO 7619-1 | 1s | 51 |
| Property Name | Standard | Test condition | Unit | Value |
|---|---|---|---|---|
| 密度 | ISO 1183-1 | kg/m³ | 1230 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
