Baytec® ENC-140P
polyether polyol; epoxy-modified polypropylene oxide-based triol; functionality 3; typical OH No. 222 mg KOH/g; typical viscosity 1,350 mPa-s @ 25°C
i
Market Switch
Selection will influence the results you get.
About
Product Types
- System
Material
No data available
General Characterization
Baytec ENC-140P is an epoxy-modified polypropylene oxide-based triol.
Storage Conditions
Baytec ENC-140P polyol is slightly hygroscopic and may absorb water. Containers should be kept tightly closed and protected from contamination with moisture and foreign materials, which can adversely affect processing. Ambient storage temperatures are recommended. This polyol has a limited shelf life when blended with nitrogen-containing species, such as amine catalysts or amine-started polyols, and will increase in viscosity and eventually gel.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
Property Name | Test Method | Unit | Value |
---|---|---|---|
Water, Wt. | % | max. 0.25 | |
Hydroxyl number | mg KOH/g | 210 - 234 |
Specifications
Property Name | Test Method | Unit | Value |
---|---|---|---|
Bulk density at 25°C | lb/gal | 9.01 | |
Appearance | Pale yellow to pale amberviscous liquid | ||
Flash point (PMCC) | °C | 227 | |
Viscosity at 25°C | mPa•s | 1,350 | |
Specific gravity at 25°C | 1.08 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com