Bayhydrol® LP MRT 1711/1
Polyolefin modified polyurethane dispersion
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Polyolefin modified polyurethane dispersion
Binder for waterborne 1K or 2K primer for PP plastic and multipul substrates can significantly improve adhesion on PP without flame treatment and various substrates.
Binder for waterborne 1K or 2K primer for PP plastic and multipul substrates can significantly improve adhesion on PP without flame treatment and various substrates.
Storage Conditions
- Storage in original sealed Covestro containers.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than 30 °C should be avoided
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.Contamination with certain bacteria, fungi or algae may render the product unusable.
- Recommended storage temperature: 5 - 23 °C, temperatures higher than 30 °C should be avoided
- Protect from frost, heat and foreign material.
General information: The product is sensitive to frost. Freezing can damage the product irreversibly. Prolonged storage at higher temperatures may affect the product properties and possibly resulting in sedimentation or coagulation. Containers must be kept sealed and protected from direct sunlight as otherwise the evaporation of water will result in the formation of a non-redispersible polymer film.Contamination with certain bacteria, fungi or algae may render the product unusable.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Property Name | Test Method | Unit | Value |
---|---|---|---|
Non-volatile content (1g / 1h / 125 °C, convection oven) | DIN EN ISO 3251 | % | 33.5 - 36.5 |
pH-value (20°C, supply form) | DIN ISO 976 | 6.0 - 9.0 | |
Flow time at 23 °C, 4mm cup | AFAM 2008/10503 | s | < 20 |
These characteristic data are tentative values |
Property Name | Test Method | Unit | Value |
---|---|---|---|
Minimum film-forming temperature | DIN ISO 2115 | °C | < 5 |
Density at 20 °C | DIN EN ISO 2811/3 | g/ml | approx. 1.1 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com