• Coatings

Bayhydrol® A 145

OH-functional PAC combinable with aliphatic PIC for 2K PU clear/topcoats for auto-repair, transportation and industrial coating. With amino resins or BL-PIC for 1K industrial baking coatings.

Contact an Expert
Market Switch
Selection will influence the results you get.
Copied to clipboard


Product Types

  • Dispersion
  • Acrylate dispersion


Elastic, Hard, Waterborne, Flexible

General Characterization

Bayhydrol A 145 is a water-reducible, hydroxyfunctional polyacrylic dispersion.
It is suitable for use in combination with aliphatic polyisocyanates to formulate aqueous two-component clear- and topcoats for vehicle repair applications, heavy transport finishing and industrial coating.
It is also suitable for use in combination with amino resins or blocked polyisocyanates for waterborne, one-component, industrial baking coatings.

Storage Conditions

Bayhydrol A 145 should be stored in tightly sealed original containers and protected from freezing, heat, and foreign materials. Short-time cooling down to -18°C does not typically damage the product, but the viscosity may increase significantly. Prolonged freezing can damage the product irreversibly. The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be restored to its original value by the addition of small amounts of an aqueous 10% solution of dimethylethanolamine. Prolonged storage at higher temperatures may result in a decrease of viscosity and/or an increase of average particle size, possibly resulting in sedimentation or coagulation. Recommended storage temperature is greater rthan 0º-30ºC.


No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Test Method Unit Value
pH (thinned 1:4 with demineralized water) 7.5 - 8.5
Non-volatile content (1g/1h/125°C convection oven) % 43 - 47
Viscosity at 23°CD= approx. 41.28s^-1 mPa∙s 400 - 1500
Acid value mg KOH/g 7 - 13

Property Name Test Method Unit Value
Flash point °C approx. 45
OH content (calculated on solid resin) % approx. 3.3
Density at 20°C g/ml approx. 1.06


Technical Data Sheet
Safety Data Sheet
No direct download available, please visit

Do you want to know more about Bayhydrol® A 145?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields