- Foams
Arcol® Polyol HS 100 - for flexible slabstock foams
An inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 45 % by weight Hydroxyl Number ca. 28 mg KOH/g
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Polyol
Material
- Foams
- Slabstock
General Characterization
Arcol® Polyol HS 100 is the secondary polyol in the Ultracel® technology for high resilience (HR) slabstock foam to provide additional loadbearing properties to Ultracel® 2009 polyol based foams.
Arcol® Polyol HS 100 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 45 % by weight.
It is specifically designed for increasing loadbearing properties of high resilience slabstock foams based on Ultracel® 2009. Up to 50 parts can be blended with Ultracel® 2009, in order to achieve HR foams with enhanced hardness.
Arcol® Polyol HS 100 can also be used for the production of conventional slabstock foams with very high loadbearing properties.
Arcol® Polyol HS 100 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx. 45 % by weight.
It is specifically designed for increasing loadbearing properties of high resilience slabstock foams based on Ultracel® 2009. Up to 50 parts can be blended with Ultracel® 2009, in order to achieve HR foams with enhanced hardness.
Arcol® Polyol HS 100 can also be used for the production of conventional slabstock foams with very high loadbearing properties.
Storage Conditions
Recommended storage temperature (°C): 10 - 35.
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
Shelf life (ex works)
12 months if stored in sealed, moisture-tight containers.
Partially used containers should be tightly resealed due to the hygroscopic nature of the product.
Recommended temperature for processing (°C): 20 - 25.
Sampling
Moisture access must be prevented when taking product samples.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Flash point | DIN ISO 2719 | °C | 254 |
| Density 25 °C | DIN 51757 | g/cm³ | approx. 1.05 |
| TDI basic value | pbw Desmodur® T80 on 100 pbw Arcol® Polyol HS 100 | 4.4 | |
| Viscosity 25 °C | PET-10-01 | mPa*s | approx. 3300 |
| Appearance | PET-03-04 | opaque white liquid | |
| Pour point | DIN ISO 3016 | °C | -18 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Water content | PET-19-01 | % by wt. | ≤ 0.06 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 26.2 - 30.2 |
| Water content | PET-19-01 | % by wt. | ≤ 0.06 |
| Hydroxyl number | PET-11-01 | mg KOH/g | 26.2 - 30.2 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
