- 3D Print
- Foams
Addigy® LPU Rigid 341-02 IM
Clear aliphatic polyether urethane resin tailored for 3D printing applications requiring high impact and mechanical performances. By using it as a primary component in 3D printing formulations, rigid parts with a very broad spectrum of tensile and strain properties can be printed to meet the required specifications. This versatile resin is compatible with a variety of reactive thinners, mixable with other Addigy® LPU products, and can be used in 1- or 2-component based formulations in combination with isocyanate reactive compounds.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- Prepolymer
- PU resin
- Prepolymer
Material
- 3D Print
- Compatible with a variety of reactive thinners
- Foams
- Rigid
General Characterization
Clear aliphatic polyether urethane resin tailored for 3D printing applications requiring high impact and mechanical performances.
By using it as a primary component in 3D printing formulations, rigid parts with a very broad spectrum of tensile and strain properties can be printed to meet the required specifications.
This versatile resin is compatible with a variety of reactive thinners, mixable with other Addigy® LPU products, and can be used in 1- or 2-component based formulations in combination with isocyanate reactive compounds.
By using it as a primary component in 3D printing formulations, rigid parts with a very broad spectrum of tensile and strain properties can be printed to meet the required specifications.
This versatile resin is compatible with a variety of reactive thinners, mixable with other Addigy® LPU products, and can be used in 1- or 2-component based formulations in combination with isocyanate reactive compounds.
Storage Conditions
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Keep container dry and tightly closed in a cool and well ventilated place.
- Protect against heat and direct sunlight.
- Recommended storage temperature: 10 - 30 °C.
- Keep container dry and tightly closed in a cool and well ventilated place.
- Protect against heat and direct sunlight.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Young’s Modulus xy-direction | ISO 527-2(1 mm/min) | MPa | 1800 |
| Elongation at break xy-direction | ISO 527-2(200 mm/min) | % | 5 - 8 |
| Glass transition temperature | DIN EN ISO 6721-1 | °C | 89 |
| Tensile strength at break xy-direction | ISO 527-2(200 mm/min) | MPa | 68 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 23 °C | DIN EN ISO 2811-3 | g/cm^3 | |
| Color | DIN EN 1557 | Hazen | 25 |
| Appearance | clear | ||
| Double bond density | % | 8 | |
| NCO (blocked) | % | 6 | |
| Viscosity at 23 °C | DIN EN ISO 3219 | mPa s | 28,000 - 32,000 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
