- 3D Print
- Elastomers
- Thermoplastic Polyurethane
Addigy® GPU 89A 000000 AF
Additive manufacturing grade for filament extrusion. Aliphatic ether/ester type; hydrolysis resistance; no yellowing; good low-temperature flexibility.
i
Market Switch
Selection will influence the results you get.
About
Product Types
- TPU
Material
- 3D Print
- Good adhesion to other polymeric materials, Good layer adhesion, Low warping, Easy printable
- Thermoplastic Polyurethane
- Cold-flexibility, Color stable
- Elastomers
- Hydrolytic stable
General Characterization
No data available
Storage Conditions
The product should be stored in its original packaging at all times.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density | ISO 1183-1 | kg/m^3 | 1130 |
| Apearance | natural color | ||
| Impact strength Izodxz-direction | DIN EN ISO 180 | kJ/m^2 | non-break |
| Tensile strength xy-direction | ISO 527-2 (200 mm/min) | MPa | 16 |
| Shore hardness A | DIN ISO 7619-1 (1s) | 85 - 89 | |
| Glass transition temperature | ISO 6721-1 | °C | - 51 |
| Abrasion resistance | ISO 4649 method A | mm^3 | 28 |
| Young’s Modulus xy-direction | ISO 527-2 (1 mm/min) | MPa | 16 |
| Elongation at break xy-direction | ISO 527-2 (200 mm/min) | % | 730 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
