Submit
  • 3D Print
  • Thermoplastic Polyurethane
  • Foams

Addigy® GPU 77D 000000 X1010

Additive manufacturing Thermoplastic Polyurethane grade for filament extrusion. Aromatic ether-based type; tough and rigid; transparent.

Contact an Expert
i
Market Switch
Selection will influence the results you get.
Copied to clipboard

About

Product Types

  • TPU

Material

3D Print
Good surface finish, Easy printable, Good layer adhesion, Good adhesion to printing bed
Foams
Rigid
Thermoplastic Polyurethane
Transparent

General Characterization

No data available

Storage Conditions

The product should be stored in its original packaging at all times.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.

Sampling

No data available

Packaging Type

No data available

Technical Properties & Datasheets

Property Name Test Method Unit Value
Density ISO 1183-1 kg/m^3 1190
Appearance natural color
Vicat softening temperature 10 N, 50 °C/h ISO 306 °C 133
Shore hardness D DIN ISO 7619-1 (1s) 77
Tensile strength xy-direction ISO 527-2(200 mm/min) MPa 27
Elongation at break xy-direction ISO 527-2(200 mm/min) % 282
Young’s Modulus xy-direction ISO 527-2(1 mm/min) MPa 435
Abrasion resistance ISO 4649 method A mm^3 52

Downloads

Technical Data Sheet
Safety Data Sheet
No direct download available, please visit www.productsafetyfirst.covestro.com
Download

Do you want to know more about Addigy® GPU 77D 000000 X1010?
Get in touch with our experts!

Contact form image Zoe

How can we contact you?

* Mandatory Fields

Compare