- Plastics
- 3D Print
- Foams
- Elastomers
Addigy® GPU 74D 000000 UV
Additive manufacturing Thermoplastic Polyurethane grade for filament extrusion. Ether type; tough and rigid; very good hydrolysis and microbial resistance; very good low-temperature impact strength; UV resistant
i
Market Switch
Selection will influence the results you get.
About
Product Types
- TPU
Material
- Elastomers
- UV stable, Hydrolytic stable
- 3D Print
- Good surface finish, Good adhesion to printing bed, Good layer adhesion, Low warping, Easy printable
- Foams
- Rigid
- Plastics
- Impact resistant
General Characterization
No data available
Storage Conditions
The product should be stored in its original packaging at all times.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Elongation at break xy-direction | ISO 527-2(200 mm/min) | % | 244 |
| Impact strength Izod, notched (1A) xz-direction | DIN EN ISO 180 | kJ/m^2 | 98 |
| Shore hardness D | DIN ISO 7619-1 (1s) | 70 - 74 | |
| Vicat softening temperature 10 N; 120 °C/h | ISO 306 | °C | 188 |
| Appearance | natural color | ||
| Young’s Modulus xy-direction | ISO 527-2(1 mm/min) | MPa | 753 |
| Tensile strength xy-direction | ISO 527-2(200 mm/min) | MPa | 42 |
| Density | ISO 1183-1 | kg/m^3 | 1179 |
| Vicat softening temperature 50 N; 50 °C/h | ISO 306 | °C | 103 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
