- 3D Print
- Elastomers
- Thermoplastic Polyurethane
Addigy® GPU 64D 000000 UV
Additive manufacturing Thermoplastic Polyurethane grade for filament extrusion. Ester type; transparent filament; hydrolysis-stabilised; with special UV stabilizers; good wear resistance
i
Market Switch
Selection will influence the results you get.
About
Product Types
- TPU
Material
- Elastomers
- UV stable, Hydrolytic stable
- 3D Print
- Good adhesion to printing bed, Good layer adhesion, Low warping, Easy printable
- Thermoplastic Polyurethane
- Transparent, Wear resistant
General Characterization
No data available
Storage Conditions
The product should be stored in its original packaging at all times.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
If bags or containers have been opened, they must then be sealed again to ensure proper further storage.
Prolonged exposure of bags or containers containing Addigy® filaments or pellets to light or light sources containing UV rays should be avoided. UV radiation will lead to degradation especially, but not limited color changes of the filaments or pellets and subsequently molded parts.
Constant, normal room temperature with minimal fluctuations and low to normal humidity is essential.
It is important to properly dry the filaments and pellets, as directed for the product, prior to processing.
Sampling
No data available
Packaging Type
No data available
Technical Properties & Datasheets
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Appearance | natural color | ||
| Tensile strength z-direction | ISO 527-2 (200 mm/min) | MPa | 18 |
| Impact strength Izod, notched (1A)xz-direction | DIN EN ISO 180 | kJ/m^2 | non-break |
| Tensile strength xy-direction | ISO 527-2(200 mm/min) | MPa | 43 |
| Young’s Modulus xy-direction | ISO 527-2(1 mm/min) | MPa | 157 |
| Young’s Modulus z-direction | ISO 527-2(1 mm/min) | MPa | 153 |
| Elongation at break z-direction | ISO 527-2(200 mm/min) | % | 160 |
| Glass transition temperature | ISO 6721-1 | °C | - 4 |
| Density | ISO 1183-1 | kg/m^3 | 1229 |
| Shore hardness D | DIN ISO 7619-1 (1s) | 60 - 64 | |
| Elongation at break xy-direction | ISO 527-2(200 mm/min) | % | 400 |
| Impact strength Izod, notched (1A)xy-direction | DIN EN ISO 180 | kJ/m^2 | non-break |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
